532612
28
Zoom out
Zoom in
Previous page
1/100
Next page
GB-28
Assembly
STEP 3
STEP 4
1. Connect the upper computer cable to the lower com-
puter cable (40 + 9) as well as both traction cables
(6 + 8).
2. Then push the handlebar support tube (7) with cover
(68) onto the main frame (26). Make sure not to
pinch the computer cable.
3. Now fasten the handlebar support tube (7) with four
M8 screws (10) and four M8 washers.
4. Then clamp the handlebar in the handlebar locking
clamp.
5. Set the front handlebar cap (75) together with the
spacer sleeve (15) over the handlebar locking clamp
(12) and fi x the handlebar cap (75) with the large
wing screw (16).
WARNING
1. Connect the computer cable of the console (4) to the
computer cable of the handlebar tube (13).
2. Lay excess cable in the handlebar tube.
3. Now fasten the computer console with four M8 x 20
mm screws (72).
4. Then fasten the rear handlebar cap with two M4
screws (70) and two M5 screws (71). Make sure that
you lay the pulse sensor cable over the rear handle-
bar cap.
5. Insert the connection of the pulse sensor into the
socket on the rear side of the computer console.
WARNING
Assembly
REX_Trainer_BX200_12.indd GB-28REX_Trainer_BX200_12.indd GB-28 02.05.12 08:1002.05.12 08:10
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossler REX Trainer BX200 88735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossler REX Trainer BX200 88735 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 10,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info