803556

Rossler 021153 Fitstar CT Manual

17
Zoom out
Zoom in
Previous page
1/36
Next page
to conrm the setting value, at the same
time enter to the next parameter to set. After
nishing the setting, user can press ST/SP and
place your palms on the both of contact pads
to start workout. The monitor will adjust the
level of loading automatically that depends
on your current heart rate.
The user can press UP or DOWN key to adjust
the level of loading during workout.
Note: the monitor will increase the level of
loading every 20s if the current heart rate is
less than the T.H.R. The monitor will decrease
the level of loading every 20s if the current
heart rate exceed the T.H.R.
Note: the monitor will emit sounds when the
function value of setting count down 0 du-
ring workout, at the same time, the monitor
will stop automatically. Then press ST/SP key,
continue workout to nish other parameters.
USER PROGRAM
The monitor allows user to set their own
prole for the feature workout.
Setting parameters for USER PROGRAM:
Select one USER PROGRAM(U1 or U2), then
press ENTER key to select the function values
of time, distance, calories, age to set. When
select the function value, it will ash and
press UP or DOWN key to adjust then press
ENTER key to conrm the setting value, at the
same time enter to the next parameter to set.
After nishing the function values setting,
press ENTER key, the 1st prole will ash,
then press UP or DOWN key to set the level of
loading and press ENTER key to conrm it, at
the same time, enter to the next one to set.
Continue to nish all the 10 proles. User can
press ST/SP to start workout.
The user can press UP or DOWN key to adjust
the level of loading during workout.
Note: the monitor will emit sounds when the
function value of setting count down 0 du-
ring workout, at the same time, the monitor
will stop automatically. Then press ST/SP key,
continue workout to nish other parameters.
Maintenance:
Verify that all the bolts and nuts are locked
properly and the turning parts should be
turned freely without damaged parts.
Clean the equipment with soap and slightly
damp cloth only. Please do not use any sol-
vent to clean the equipment.
Malfunctions and treatment:
Base is unstable. Floor is not at or there is
small object under the front or rear stabilizer.
Remove the object. The rear stabilizer end
caps have not been leveled when assem-
bling. Adjust the rear stabilizer end caps.
Loud noise from the moving parts. The
interval of the parts is improperly tightened.
Open the covers to adjust.
No resistance while using the equipment.
The interval of the magnetic resistance
increases. Open the covers to adjust.
Tension control is damaged. Change the
tension control.
Running belt slips. Open the covers to adjust.
The bearing set is damaged. Change the
bearing set.
EN
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossler 021153 Fitstar CT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossler 021153 Fitstar CT in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info