803558

Rossler 021121 Fitcrossing Manual

15
Zoom out
Zoom in
Previous page
1/36
Next page
Power Up
When turned on, the monitor will emit a long
beep sound and all LCD displays light up. Af-
ter that it will enter the MANUAL PROGRAM.
There are 6 basic workout modes:
MANUAL
PRESET PROGRAM
BODYFAT PROGRAM
T.H.R PROGRAM
HRC PROGRAM
USER PROGRAM
Note: the monitor will sleep when no signal
inputs for four minutes. Then pedal or press
any key to wake-up the monitor.
Pause
Workout can be paused by pressing ST/SP
key. Workout will resume when ST/SP key is
pressed again.
Key functions
ENTER:
1. Press to conrm selected work out mode.
2. Press to conrm value of setting mode.
UP:
1. Press to select a workout mode.
2. Press to increase the value in setting mode.
3. Press to increase the level of loading in
workout mode.
DOWN:
1. Press to select a workout mode.
2. Press to decrease value in setting mode.
3. Press to decrease the level of loading in
working mode.
RECOVERY:
Press this key to start recovery measurement
for 60s, meanwhile please hold the hand pul-
se touch sensor. After 60 seconds the display
will show one of F1 to F6, F1 is the best, F6 is
the worst.
START/STOP:
1. Press to start workout in selection mode.
2. Press to pause it in workout mode.
3. Press to start measurement in BodyFat
program.
Workout parameters:
After selecting desired workout mode you
may pre-set several workout parameters for
desired results.
TIME
DISTANCE
CALORIES
AGE
Note: some workout parameters can not be
set in certain program. More about workout
parameters in the table on the next page.
Program Operation
MANUAL PROGRAM
Setting parameters for MANUAL PROGRAM:
Select MANUAL PROGRAM by UP or DOWN
key, then press ENTER key, and select the
function values of time, distance, calories,
age etc to set, when select the function value
it will ash, then press UP or DOWN key to
adjust and press ENTER key to conrm the
setting value, at the same time enter to the
next parameter to set. After nishing the
setting, user can press ST/SP to start workout.
The user can press UP or DOWN key to adjust
the level of loading during workout.
Note: the monitor will emit sounds when the
function value of setting count down 0 du-
ring workout, at the same time, the monitor
will stop automatically. Then press ST/SP key ,
continue workout to nish other parameters.
PRESET PROGRAM
There are 12 preset programs.
Setting parameters for PRESET PROGRAM:
Select one PRESET PROGRAM by UP or
DOWN key, then press ENTER key and select
the function values of time, distance, calories,
age etc to set, when select the function
value, it will ash and press UP or DOWN key
to adjust, then press ENTER key to conrm
EN
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossler 021121 Fitcrossing at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossler 021121 Fitcrossing in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info