Manual Rossler 021099 Fysic Speedbike (page 20 of 38) (English, Dutch, French)

533506

Zoom out

Zoom in

1/38

- 20 -

Assembly Instructions

Step A:

Install the Front stabilizer (2) and Rear stabilizer (3) to

the Main frame (1) with the Allen bolts (14) and Flat

washers (13) as shown. Please make sure that the

Leveler feet are on the bottom and the transportation

wheels are facing up and towards the front of the

bike.

Attach the Water bottle holder (19) to the frame with

the Screws (17), and then put on the Water bottle

(20).

Note:

The Leveler feet (11) under the stabilizers can be

adjusted to keep the equipment stable.

Step B:

Attach the Handlebar (4) to the Handlebar post (26),

secured with the Allen bolts (23), Spring washers

(24), and Flat washers (13).

Slide the Lower cover (25B) to the Handlebar post, ﬁ t

the Top cover (25A), and then locked the Cover with

Phillips screws (27) as shown.

Turn and loosen the Knob (8), pull the pin, and then

insert the Handlebar assembly into the Main frame

section simultaneously at a proper height. Make sure

the pop-pin settles into the desired hole and then

secure the Knob.

Step C:

Fit the Saddle (7) on the Seat slider (6) with wrench.

Insert the Seat slider (6) to the Seat post (5), secured

with the Knob (8).

Turn and loosen the Knob (8) on the main frame

section, pull the pin, and then insert the Seat post (5)

into the Main frame (1) simultaneously. Make sure

the pin settles into the desired hole and then secure

the Knob.

Note:

The position of saddle is Horizontal & Vertical

adjustable by the both Knob (8). Please make sure

that the Saddle (7) was securely fastened before

getting on the Bike.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rossler 021099 Fysic Speedbike in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rossler 021099 Fysic Speedbike Manual

Product: