803562
9
Zoom out
Zoom in
Previous page
1/36
Next page
NL - EN - FR
3
Bevestig de swingarm (6L) op de lange as (27) van computerstang (2) met inbusbout (24), veer-
ring (52), platte ring (25) en gegolfde ring (64). Bevestig de pedaalstang (5L) aan de crank (22)
met behulp van de pedaal/crankbout (38L), golfring (62), veerring (41) en borgmoer (42L). Sluit
de swingarm (6L) op pedaalstang (5L) aan met behulp van inbusbout (30), platte ring (31) en
borgmoer (32). Draai de inbusbouten (24,30) en borgmoer (42L) goed vast. Dop de moeren af
(23, 57, 43). Doe dit ook met de andere kant. Bevestig het pedaal (10L/R) aan de pedaalstangen
(5L/R) met inbusbout (33), platte ring (34) en borgmoer (35).
Fix the Swing bar (6L) on the long axle of the Handlebar post (2) with Hex bolt (24), Spring washer
(52), Flat washer (25), Wave washer (64) and Long axle (27) as shown. Attach the connecting joint
together with Pedal Support (5L) to the crank (22) using Pedal support bolt (38L), Waveform
washer (62), Spring washer (41) and Nylon nut (42L) as shown. Connect Swing bar (6L) with Pedal
support (5L) using Hex bolt (30), Flat washer (31) and Nylon nut (32). Tighten the Hex bolt (24)
(30) and Nylon nut (42L). Cover the Nut caps (23) (57) (43). Fix the other side the same way. Fix the
Pedal (10L/R) to the Pedal support (5L/R) with Hex bolt (33), Flat washer (34) and Nylon nut (35).
Fixez le bras articulé (6G) sur l’axe long de la tige du guidon (2) à l’aide des boulons hex (24),
des rondelles ressort (52), des rondelles plates (25), des rondelles ondulées (64) et de l’axe long
(27), comme sur l’illustration. Attachez la pièce de raccordement avec le support de pédale (5G)
à la manivelle (22) à l’aide du boulon de verrouillage de pédale (38G), de la rondelle (62), ron-
delle (41) et de lécrou en nylon (42G). Connectez le bras articulé (6G) au support de pédale (5G)
à l’aide du boulon hex (30), de la rondelle (31) et de l’écrou en nylon (32). Serrez les boulons hex
(24) (30) et l’écrou en nylon (42G). Pour nir, mettez en place les cache-écrous (23, 57, 43) Fixez
le procédant de la même manière. Fixez les pédales (10G/D) aux supports de pédales (5G/D) à
l’aide des boulons hex (33), des rondelles plates (34) et des écrous en nylon (35).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossler 021092 Cluster crosstrainer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossler 021092 Cluster crosstrainer in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info