Manual Rosieres RF 43 RB (page 20 of 24) (English, French)

579405

Zoom out

Zoom in

1/24

7. CHILD SAFETY

20 GB

6. PYROLYTIC CYCLE

**Oven must have this function

The oven is equipped with a pyrolyser cleaning system, which

destroys food residues at high temperature.The operation is carried

out automatically by means of the programmer.The resulting fumes

are rendered “clean” by passing over a Pyrolyser wich starts as soon

as cooking begins. As very high temperatures are required by the

Pyrolyser, the oven door is fitted with a safety lock.

The pyrolyser can be stopped at any time. The door cannot be opened

until the safety lock is displayed.

NOTE : If a hob has been fitted above the oven, never use the gas

burners or the electric hot-plates while the Pyrolyser is working, this

will prevent the hob from overheating.

TWO PYROLYTIC CYCLE are pre-set.

. ECO PYROCLEAN : Cleans a moderately stained oven.Operates

for a period of 65 minutes.

. SUPER PYROCLEAN : Cleans a heavily stained oven.Operates for

a period of 90 minutes.

Never use commercially available cleaning products on a

Pyrolytic oven !

Tip : Carrying out Pyrolytic cleaning immediately after cooking allows

you to take advantage of residual heat, thus saving energy.

Before carrying out a Pyrolytic cycle :

•Remove all accessories from the oven : They cannot withstand the

high temperatures and would be damaged by pyrolytic temperatures.

•Remove any large spillages or stains as it would take too long to

destroy them. Also excessively large amounts of grease could ignite

when subject to the very high temperatures of the Pyrolyticcycle.

•Close the oven door.

•Excess spillage must be removed before cleaning.

Using the pyrolytic cycle :

1- Turn the function selector knob to “Pyrolytic Mode”. “PYRO” will

appear on screen. ECO mode flashes.

Remember : ECO - cycle of 65 minutes - moderately stained oven

SUP - cycle of 90 minutes - heavily stained oven

2- By using the central button select the required Pyrolytic mode,

according the degree of staining : ECO or SUP.

• Your choice is confirmed after 3 seconds...

The oven starts the pyrolytic cycle. The pyrolytic mode selected

flashes and the “time” and “stop” indicator lights will appear.

During the pyrolytic cycle, the locking oven door appears, it indicates

that the door is locked. The cooling fan will operate.

The indicator light flashes until the temperature required is not

reached and then it becomes fixed.

* The start of the pyrolytic cycle can be delayed by selecting an end of

time. Turn the programmation control knob to the end of time and set

the end of time required.

•During self-cleaning pyrolytic operation the surfaces may get hotter

than usual and children should be kept away.

At the end of the pyrolytic cycle the oven will automatically switch

off.

For 15 seconds, an audible signal lets you know that the cycle has

ended and the “time” and “Stop” indicator lights will flash.

•Turn the function knob to stop. Unless you do this, the

symbols will continue flashing. The symbol “Pyro” disappears on the

Timer, the pyrolytic mode. The oven door will remain locked until the

temperature is high. So, as the locking oven door is light, the oven can

not be opened.

The cooling fan does not switch itself off until the temperature of the

oven components is reasonable.

At the end of the cycle, the indicator flashes again, it will remain also

turned on after having extinguished the oven and it will estinguish

when the inside temperature of the oven is sufficiently low.

Pyrolysis leaves a white residue on the oven walls. Wait for the oven to

cool completely then clean the inside of the oven with a damp sponge

to wipe off the residue.

This function is essential, especially when children are around. It

prevents children from switching the oven on or altering the preset

programmes.

This safety system locks the oven control panel while it is operating.

There are two levels of safety :

LEVEL 1 : Locking selector control knob and the central button.

•To activate : Turn the programmation control knob to child safety.

•Action : The control knobs are inactive*.

•To deactivate : Turn the programmation control knob to 0.

LEVEL 2 : Locking function selector knobs

•To activate : Turn the function selector knob to child safety and keep

the central button pressed in for 3 seconds.

•Action : All the controls are inactive*.

•To dactivate : the same procedure as for activating. Turn the function

selector knob to child safety and keep the central button Pressed in for

3 seconds.

*Note : In all cases, for reasons of safety, even when the controls are

locked, the oven can be switched off by turning the selector knob to 0.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rosieres RF 43 RB in the language / languages: English, French as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rosieres RF 43 RB Manual

Product: