638825

Ronco 5250 EZ-store Rotisserie Manual

5
Zoom out
Zoom in
Previous page
1/32
Next page
CLEANING & CARE 5
IMPORTANT: “Set It and Forget It”
®
only after all instructional materials
(written and DVD) have been carefully followed.
Make sure food safely rotates without touching the Heating Element.
Please Don’t Take “Set It and Forget It”
®
Literally
Always use caution and check on your Rotisserie from time to time.
It is highly unlikely, but if you should see or smell heavy smoke it’s because the food is
rubbing against the hot Heating Element. This indicates that the meat or poultry is too
big or it wasn’t placed properly - or the food is off-center (lopsided) on the spit rods or
in the basket. If this occurs:
Turn off and unplug your machine. Do not open the Glass Door. Let it cool down.
Trim any excess fat or meat, position your food tightly in the basket and be sure the
food is centered in the basket so it always rotates without touching the Heating Element.
Cleaning and Caring for your Rotisserie
The Glass Door:
Turn lid right-side-up and insert the side lid pins into the pivot holes in
the Rotisserie base (see pg 7 for diagram).
After Use: Unplug and allow it to cool before washing any parts. NOTE: The Heating
Element cleans itself and no other maintenance is necessary.
The Light: The light is on when the heat is on. Replace light bulb with a 25 watt appli-
ance bulb when needed.
Never Use Metal Cleaning Pads on the Non-stick Surfaces. They will permanently
scratch the surfaces of the Grate Cover, Drip Tray, Steaming Tray, etc.
Discoloration? Some discoloration over time is to be expected when you work with
hot food - especially food with fat. It’s normal and will not affect the function. On white
machines it gets slightly browner on the front of the machine by the Glass Lid. While
not recommended, you can return your machine and, for a nominal fee, the factory will
refinish the special outside surface.
Cleaning Stainless Steel (Stainless Model Only) - We recommend cleaners or wipes
designed specifically for stainless steel surfaces. These cleaners are available at your
local grocery or hardware store.
Any repairs should be handled only by an authorized service facility. Call Customer
Service at 1-855-85-RONCO (76626) and leave a message if after standard business
hours. Or you can contact us via email at support@ronco.com or visit our help desk
http://support.ronco.com.
BEFORE FIRST USE: Be sure the Rotisserie is not plugged in. Wash and dry the
removable parts in warm soapy water. Never immerse the machine or the cord in
water. Keep at least 8 inches of clearance on all sides and do not place it under a
cabinet when in use. A little smoke is normal when you first use the machine.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ronco 5250 EZ-store Rotisserie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ronco 5250 EZ-store Rotisserie in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info