714018
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
becomes visible. This shows that the automatic heating system has been triggered. If the heat level is
reduced within 10 seconds by means of the – sensor, the automatic heating system remains activated
for all settings. As long as the automatic heating system is on, the hot tray is operated with maximum
power during the initial heating period, which is in return dependent on the heat level selected. Once
the automatic heating peak is over, the luminous point will go out and the hot tray has reached the
desired temperature.
Safety functions
The Touch Control technology features several safety functions so as to prevent any unintentional activation.
If you do not trigger any further functions within 10 seconds after the appliance has been switched
on, the hot tray will automatically switch off again.
Beyond that, its electronics detects whether the sensors are touched purposefully. If you place a kit-
chen towel or similar on the appliance, it will not get triggered. The same goes for liquids that might
run over the glass surface.
The safety switch-off will also get triggered if one or several sensors are activated for more than
12 seconds. In this case the control system switches off the hot tray. In the heat level display, an ‘F’
flashes up. In this case, please switch off the appliance completely via the POWER sensor and start
the keep warm procedure anew.
When the appliance is switched on, the sensors adjust themselves automatically to the environmen-
tal conditions. During that adjustment the glass surface above the sensors must not be covered. Only
if it is exposed to extreme external light, or if it is covered with a light object, an adjustment will not
be possible. This will also be indicated through an ‘F’ in the heat level display. In this case too, please
switch off the appliance completely via the POWER sensor, remove the external light and the cover
respectively and start the keep warm procedure anew.
4. Temperatures
WP 250 and WP 350
Once switched on, these models heat up to the maximum temperature of about 105 °C and keep it until
switch-off.
WPR 305/E and WPR 405/E
These models feature a continuous temperature regulation from about 40 °C to about 105 °C.
WPE 308/TC
There are 9 temperature levels which can be selected:
1 approx. 40 °C 3 approx. 60 °C 5 approx. 75 °C 7 approx. 90 °C 9 approx. 105 °C
5. Cleaning and maintenance
Always unplug and let cool down the appliance before
cleaning. Never immerse appliance, power cord or plug in
water for cleaning. Make sure no water or steam may infilt-
rate the appliance from below!
Clean the appliance with a damp cloth and some dishwashing detergent. Dry it thoroughly.
Treat the surfaces with suitable care products from time to time.
Never use abrasives, solvents, steel wool or pointed objects!
Never treat the appliance with a steam cleaner!
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher WPR305E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher WPR305E in the language / languages: English, German, French as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info