714290

Rommelsbacher TA2000 Manual

33
Zoom out
Zoom in
Previous page
1/36
Next page
33
WARNING: Hazard of injury or burns!
• Always pull the mains plug prior to cleaning!
• Never immerse base unit, glass jug, power cord and mains
plug in water nor clean under running water!
• Prior to cleaning, it is imperative to let cool down the
appliance and all accessories!
Cleaning the appliance
• Clean the appliance and all accessories after each use.
• Wipe the base unit and glass jug with a moist cloth and dry it afterwards.
• Wash tea infuser, jug’s lid and lid insert for the tea infuser in hot water with some detergent and dry it
afterwards.
°
Remove discolorations at the glass jug or the tea infuser by using a special brewer cleaner for coffee
makers (obtainable in specialist shops).
°
You may alternatively use a solution of water with salt, baking soda or lemon juice.
• We do not recommend cleaning the accessories in the dishwasher.
• Do not use abrasives or solvents; do not use sharp, scratchy objects!
• Do not treat the appliance or the accessories with a steam jet cleaner!
Decalcification
• A regular decalcification saves energy and grants full heating power as well as a good taste of tea
and a long lifespan of the appliance.
• Heavy calcification may cause an overheating of the appliance and thus irreparable damage.
• The appliance should be descaled regularly in order to grant a proper functioning. Depending on the
water hardness and the frequency of use, we recommend a decalcification every 2 - 3 weeks. This
also applies if filtered water is used.
• Observe the following instructions for decalcification!
• Always remove the tea infuser before descaling the appliance.
• For decalcification, prepare 1 litre descaling agent made of vinegar water in the proportion of
1/3 vinegar essence and 2/3 water and pour it into the glass jug.
• Start operating the appliance by pressing the button “Boiling” and the button “Start/Stop” and heat
up the descaling solution to about 80 °C. If the temperature is reached, stop the heating up process
(press the button “Start/Stop” for 2 seconds or remove the glass jug from the base unit).
• Leave the descaling solution to take effect for some time.
• Then drain the descaling solution, rinse the glass jug and fill it with 1 litre of clear tap water.
• Start operation of the appliance with the button “Boiling” and the button “Start/Stop” and bring the
water to a boil. Repeat this procedure as often as required.
• Afterwards clean the glass jug thoroughly.
• In case you use ordinary descaling agents, observe the manufacturer’s instructions.
IMPORTANT: Non-observance of decalcification instructions will void all warranty rights in case of
claims caused by a faulty functioning due to heavy calcification!
Cleaning and maintenance
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher TA2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher TA2000 in the language / languages: English, German as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info