714260
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
3.) How to fill the glass bowl
CAUTION:
Before removing the motor unit, make sure the power plug is
disconnected from the socket!
Do not accidently hold down the switch-ON button!
Remove the motor unit and the working cover.
Insert the special cutter. For bigger quantities we recommend to use all 4 cutting blades. For small quantities
you can disassemble the blade and work with only 2 cutting blades.
Fill the glass bowl with food. Pay attention to the maximum filling quantity (MZ 400: 1.0 l – MZ 500: 1.5 l).
Then put on the working cover and the motor unit. Make sure that the appliance has been correctly and
properly assembled and that the glass bowl is standing on the anti-slip mat.
4.) How to start/stop the appliance
Pay attention to a safe position of the working cover and only operate the appliance if the working cover is
tightly closed!
Before connecting the power plug to a socket, make sure that you do not accidently hold down the ON button!
To start the appliance, press the ON button and hold it down for operation. When releasing the ON button,
the appliance stops.
Depending on the material to be crushed, you can chose between permanent operation (hold the ON button
permanently down) and interval operation (press the ON button for 2 – 3 seconds, then 2 – 3 seconds pause,
repeat several times).
Caution: Do not let the motor run for more than 20 seconds without interruption!
Release the ON button for switching off the appliance. Upon completion of the crashing process and before
taking off the motor unit, always disconnect the power plug from the socket!
5.) How to empty the glass bowl
CAUTION:
Before removing the motor unit, pay attention that the power plug is
disconnected from the socket!
Do not accidently hold down the switch-ON button!
Remove the motor unit and the working cover (see point “How to disassemble the appliance”).
Carefully remove special cutter and foods from the glass bowl.
6.) How to switch off the appliance permanently
For a safe switch off, pull the power plug after every use!
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher MZ500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher MZ500 in the language / languages: English, German as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info