714259
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
Safety advices for using the appliance
Caution: Hazard of injury!
Before replacing accessories or accessories parts that are
moving during operation, the device must be switched off and
disconnected from the power socket!
When disassembling, assembling or cleaning do not reach into
the sharp blades of the 4-bladed special cutter! Only touch the
blades at the top of the shaft!
Handle the special cutter with care to avoid injuries!
The appliance has a delayed motor stop after it has been
switched off. Therefore only remove motor unit and working
cover after complete standstill!
• The appliance is not suitable for processing deep-frozen or too hard foods.
• Do not operate the appliance outdoors or near sources of heat (oven, gas flame
etc.) or in explosive environments, where inflammable liquids or gases are
located.
• Place the base unit and the special cutter beyond children’s reach.
• Always unplug the appliance from the power socket if it is not supervised and
prior to assembly, disassembly, cleaning or non-use.
• During operation, do not stir in glass bowl with objects and never reach into the
running special cutter. To avoid injuries it is imperative to keep away your hair,
hands and clothes from the running appliance.
• Avoid any no-load operation. Do not handle the appliance with wet hands!
• Never immerse the appliance, the power cord and the plug into water for
cleaning.
• Do not store the appliance outside or in wet rooms.
• Use original accessory parts only.
• Pull the power plug after each use for safe switch-off.
Prior to initial use
For a start, please clean the appliance as well as all accessory parts. For more detailed information please refer to
chapter “Cleaning and maintenance”.
Integrated safety system
The appliance is equipped with a safety system. A micro switch ensures that the appliance does only function, if
the motor unit is correctly placed on the working cover. Additionally, a spring mechanism on the motor coupling
protects against improper operation. This and the observance of this instruction manual, ensure a safe operation.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher MZ400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher MZ400 in the language / languages: English, German as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info