714238
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
Drip tray
Overheating/boil dry protection
The unit features a detachable drip tray which is not mounted when delivered.
To fix the drip tray, engage the snap arms into the intended gaps. Press down the tray to lock in
place.
During use, the drip tray should be emptied regularly to avoid overflow.
The drip tray can be detached any time for cleaning or storage purpose. For detaching cautiously
lift the tray until the snap-arms disengage, then take out to the front.
The integrated overheating/boil dry protection will cut the power supply in case the appliance gets
overheated. Both pilot lamps extinguish. After this cut-off a reset of the fuse is necessary.
NOTE: The appliance can only be restarted after it has cooled down and a reset of the overheating
protection had been done.
Switch the appliance off by setting the rocker switch to
„0“-position and pulling the mains plug.
Let the appliance cool down for a short while and empty
the pot.
To make a reset of the overheating protection, press
the pivot at the underside of the appliance. You have
successfully reset the fuse when you heard a clear “click”.
Now the appliance can be restarted.
Hazard of injuries or burns! Always disconnect the mains plug
prior to cleaning.
Never immerse appliance, mains plug and power cord in water!
Let all parts cool down before cleaning!
Clean the appliance after each use and after prolonged storaged.
• Clean the pot outside and inside with a damp cloth.
• Disassemble and clean outlet tap and level indicator. To do so, use a small bottle brush, for
example. (See also under “Outlet tap” and “Level indicator”).
• Detach and clean the drip tray.
• Wipe thoroughly dry all parts after cleaning.
• Also make sure that no water or steam may infiltrate the underside of the appliance.
• Do not use abrasives or solvents!
• Do not use steel wool or sharp, scratchy objects for cleaning!
• Do not use a steam-jet appliance!
• Make sure the appliance was cleaned completely before storing it in a dry place.
Descaling the appliance
Depending on the water hardness, a descaling of the appliance is necessary from time to time as
a calcareous layer may influence the heating performance and the temperature control.
• Calcareous residues can be removed with some vinegar in water or with a standard descaling
agent.
• Afterwards boil the appliance with clear water and rinse thoroughly.
• When using descaling agents, observe the producer’s instructions.
Cleaning and maintenance
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher GA1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher GA1000 in the language / languages: English, German as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info