714247

Rommelsbacher FRP2135E Manual

15
Zoom out
Zoom in
Previous page
1/28
Next page
No function
The deep
CAUTION
No function
The deep
-
fryer does not heat and the operating pilot lamp does not glow.
CAUTION
! The
deep
No function
–
what is to be done
fryer does not heat and the operating pilot lamp does not glow.
deep
-
fryer must be completely dry before each time of use.
what is to be done
fryer does not heat and the operating pilot lamp does not glow.
•
The condensate collection basin is located at the back side of the
appliance. This
during frying is gathered. It can be pulled out easily.
•
For cleaning of frying basket, frying container, cover, casing and
accessories we recommend hand
dishwashe
salt.
•
Never immerse the heating element with the control unit in water. Use a
damp cloth only for
•
After cleaning make sure the deep
reverse order of its disassembly. Ensure that the heating element is
positioned correctly.
•
Do not use any abrasives and solvents!
•
Do not use sharp objects or brushes!
•
Never use a steam jet appliance for cleaning
fryer must be completely dry before each time of use.
what is to be done
?
fryer does not heat and the operating pilot lamp does not glow.
a)
The deep
released
Let the
the front of the control unit
b)
The control unit with the heating element was not properly
assembled
Place the control element exactly at the guide ribs and press it
gently into its
c)
The main switch is not set at ON.
S
et the main switch at ON.
The condensate collection basin is located at the back side of the
appliance. This
plastic basin is where the condensed water generated
during frying is gathered. It can be pulled out easily.
For cleaning of frying basket, frying container, cover, casing and
accessories we recommend hand
dishwashe
r might corrode the surfaces because of the used dishwasher
Never immerse the heating element with the control unit in water. Use a
damp cloth only for
After cleaning make sure the deep
reverse order of its disassembly. Ensure that the heating element is
positioned correctly.
Do not use any abrasives and solvents!
Do not use sharp objects or brushes!
Never use a steam jet appliance for cleaning
fryer must be completely dry before each time of use.
fryer does not heat and the operating pilot lamp does not glow.
The deep
-
fryer was overheated; the overheating protection was
released
.
Let the
deep-
fryer cool down; then press the reset button located at
the front of the control unit
The control unit with the heating element was not properly
assembled
.
Place the control element exactly at the guide ribs and press it
gently into its
proper position.
The main switch is not set at ON.
et the main switch at ON.
The condensate collection basin is located at the back side of the
plastic basin is where the condensed water generated
during frying is gathered. It can be pulled out easily.
For cleaning of frying basket, frying container, cover, casing and
accessories we recommend hand
r might corrode the surfaces because of the used dishwasher
Never immerse the heating element with the control unit in water. Use a
damp cloth only for
cleaning it. Thereafter, dry all parts carefully.
After cleaning make sure the deep
reverse order of its disassembly. Ensure that the heating element is
positioned correctly.
Do not use any abrasives and solvents!
Do not use sharp objects or brushes!
Never use a steam jet appliance for cleaning
fryer must be completely dry before each time of use.
fryer does not heat and the operating pilot lamp does not glow.
fryer was overheated; the overheating protection was
fryer cool down; then press the reset button located at
the front of the control unit
The control unit with the heating element was not properly
Place the control element exactly at the guide ribs and press it
proper position.
The main switch is not set at ON.
et the main switch at ON.
The condensate collection basin is located at the back side of the
plastic basin is where the condensed water generated
during frying is gathered. It can be pulled out easily.
For cleaning of frying basket, frying container, cover, casing and
accessories we recommend hand
-
wash in hot soapy water. Cleaning in the
r might corrode the surfaces because of the used dishwasher
Never immerse the heating element with the control unit in water. Use a
cleaning it. Thereafter, dry all parts carefully.
After cleaning make sure the deep
-
fryer is prop
reverse order of its disassembly. Ensure that the heating element is
Do not use any abrasives and solvents!
Do not use sharp objects or brushes!
Never use a steam jet appliance for cleaning
!
fryer must be completely dry before each time of use.
fryer was overheated; the overheating protection was
fryer cool down; then press the reset button located at
the front of the control unit
.
The control unit with the heating element was not properly
Place the control element exactly at the guide ribs and press it
proper position.
The main switch is not set at ON.
The condensate collection basin is located at the back side of the
plastic basin is where the condensed water generated
during frying is gathered. It can be pulled out easily.
For cleaning of frying basket, frying container, cover, casing and
wash in hot soapy water. Cleaning in the
r might corrode the surfaces because of the used dishwasher
Never immerse the heating element with the control unit in water. Use a
cleaning it. Thereafter, dry all parts carefully.
fryer is prop
erly re-
assembled in the
reverse order of its disassembly. Ensure that the heating element is
fryer must be completely dry before each time of use.
fryer was overheated; the overheating protection was
fryer cool down; then press the reset button located at
The control unit with the heating element was not properly
Place the control element exactly at the guide ribs and press it
The condensate collection basin is located at the back side of the
plastic basin is where the condensed water generated
For cleaning of frying basket, frying container, cover, casing and
wash in hot soapy water. Cleaning in the
r might corrode the surfaces because of the used dishwasher
Never immerse the heating element with the control unit in water. Use a
cleaning it. Thereafter, dry all parts carefully.
assembled in the
reverse order of its disassembly. Ensure that the heating element is
fryer was overheated; the overheating protection was
fryer cool down; then press the reset button located at
The control unit with the heating element was not properly
Place the control element exactly at the guide ribs and press it
down
15
wash in hot soapy water. Cleaning in the
r might corrode the surfaces because of the used dishwasher
Never immerse the heating element with the control unit in water. Use a
assembled in the
fryer cool down; then press the reset button located at
down
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher FRP2135E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher FRP2135E in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info