714245
21
Zoom out
Zoom in
Previous page
1/24
Next page
Switching the appliance on or off
Attention hazard of injury: Do not grasp in the filling hole and the grater! The grater is
very sharp, handle the grater with care to avoid injuries!
• Before plugging the appliance in make sure that you have not accidentally switched it on!
• Remove the pusher from the filling hole.
• Switch the appliance on.
For starting the appliance, turn the rotary knob to the right to the desired
speed level.
For a better orientation, the speed is classified in 5 levels.
The appliance has a “soft-start”, i. e. the appliance starts slowly and increases
the speed evenly to the level you set.
• Pour the food in the filling hole and press it down with the pusher. This can be repeated accor-
ding to requirements. Make sure that you do not fill too much food in and that you do not
apply too much pressure with the pusher.
The best results will be achieved if you press down the pusher slowly.
Please make sure that the vessel below the spout does not spill and that the pulp container is
not too full.
• Switch the appliance off.
For switching off, turn the rotary knob to the left to the position “0”.
Always pull the mains plug after the extracting procedure has been finished!
Emptying the pulp container during use
When extracting larger quantities, the pulp container should be emptied regularly to ensure a
trouble-free operation of the appliance.
• Switch the appliance off – pull the mains plug!
• Remove the pulp container (see “How to disassemble your appliance”).
• Clean the pulp container.
• Attach the pulp container (see “How to assemble your appliance”).
• Before plugging the appliance in make sure that you have not accidentally switched it on!
• Switch the appliance on and start working again.
Easing congestions of the grater during use
During use, it might happen that the pulp accumulates below the filling hole and congests the
grater. This can happen if you process very hard and fibrous food too quickly and with too much
pressure on the pusher. Then, it is necessary to ease this congestion.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher ES800E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher ES800E in the language / languages: English, German as an attachment in your email.

The manual is 11,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info