28
Warning: Casing, brew head,
portafilter, filter inserts and hot
water/steam nozzle are getting hot
GXULQJXVH
Step 1:
Remove the water tank
(previously remove the portafilter if
necessary).
Step 2:
Fill the water tank with fresh tap
water.
2EVHUYHWKHĐ0$;đPDUNLQJ
Step 3:
Insert the water tank.
Make sure the water tank is inserted
as far as it will go on the gasket.
Step 4:
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 8:
Start hot water supply.
Turn the rotary knob to the right.
Dispense hot water until it comes
without air. Use the water for
warming the cups.
Step 5:
Place a vessel below the outlet of
the hot water/steam nozzle.
Step 6:
Choose the function
“espresso/hot water”.
Step 7:
Switch the appliance on.
The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.
Step 9:
Stop hot water supply.
Turn the rotary knob to the top.
NOTE: The appliance carries excess
water back into the water tank via a
UHFLUFXODWLRQV\VWHP
Bleeding the system
Ě ,QRUGHUWRHQVXUHSHUIHFWRSHUDWLRQRIWKHDSSOLDQFHLWLVLPSRUWDQWWKDWWKHV\VWHPLVEOHGSULRUWRLQLWLDOXVHRUDIWHU
a longer non-use period.
Ě ,IWKHZDWHUWDQNJHWVHPSW\GXULQJXVHWKHV\VWHPZLOOVXFNDLUZKLFKPXVWEHUHPRYHGE\EOHHGLQJWKHV\VWHP