714010
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
Operating the appliance
Standby mode
Connect the mains plug with the power
socket.
The display (4) shows “OFF“ and an
acoustic signal is audible.
The control is in standby mode.
Switching-on
• Position suitable cookware on the middle
of the cooking zone.
For switching-on touch the main switch (1).
The display (4) shows “00“ and the LEDs
“power“ (7) and “temp“ (6) are flashing.
• Now decide on the cooking mode you
would like to work with (either “power
level“ or “temperature level“).
NOTE: If there is no further activation within 60 seconds after switch-on, the control will switch
back to the standby mode.
Cooking in “power level“ mode
The “power level” mode is ideal for boiling water and for steaming.
• For cooking in the “power level” mode touch
the “power“ sensor (7).
The appliance automatically switches to the
power level “06“. The display (4) shows
“06“ and the LED “power“ (8b) is lit
continuously.
NOTE: In case the appliance had not been
separated from the mains after its previous
use the display shows, as a suggestion, the
power lever as lastly set.
• By touching the “+“ sensor (3) you can
increase the power up to level 10.
• By touching the “-“ sensor (5) you can
reduce the power down to level 01.
Priority regulation
Although any other sensor is still activated, the appliance may be brought to the standby mode
at any time during operation by touching the associated main switch sensor.
By default the “power level” mode is displayed by the figures “01” to “10”. By simultaneously
touching the “+” and “-“ sensors for 3 seconds the display switches over to show the power va-
lues instead of the power levels; this means for example that “100” is displayed instead of “01”
and “800” instead of “06” etc.. This format is valid until the user will set it back. The selected
display format remains saved also after switch-off. Only after pulling the mains plug or a cut-off
from the mains there is a reset of the control to the default format with the figures “01” to “10”.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT3410IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT3410IN in the language / languages: English, German as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info