714226

Rommelsbacher CT3408IN Manual

13
Zoom out
Zoom in
Previous page
1/16
Next page
13
Approximately 5 seconds after setting the operating time the display will change back to the
original operating mode. If the „TIMER“ button is activated again, the remaining operating time
will appear on the display for about 5 seconds, and you may also choose to vary it further.
When the preset time has elapsed, there will be an audible signal and the control will automati-
cally switch over to the stand-by mode.
Note: Changing either the power or the temperature level does not affect the preset operating
time.
Safety functions
This cooking plate comes with a number of safety features to protect the user as well as the
appliance against any unintentional or hazardous operating situations.
a) Priority regulation
The control mode can be disabled via the main switch at any time, regardless of whether any
other buttons have been activated.
b) Operating time limitation
The operating time limitation will cause the cooktop to switch off automatically if the settings
have not been changed for a period of 2 hours. Such will happen independently of the level set
in each case. When automatic switch-off was effected, the cooking plate can be switched on
once more and the maximum operating time will be active again.
c) Residual heat indication
If the temperature on the cooktop has reached a value of more than 50 °C due to the waste heat
emitted by the pot, there will appear an H (= hot) on the display. As soon as the temperature has
sunk below 50 °C the display shows L (= low).
If the appliance is disconnected from the mains, this indication on the display will extinguish.
d) Mains control
Overcurrents that might be generated by reason of strong fl uctuations of the mains voltage will
be detected by the control system and will cause the appliance to switch off automatically.
e) Error codes
The electronic control system features numerous internal monitoring functions. If an error
occurs, the power supply will be quit and an error code will appear on the display.
Table of error codes:
Overcurrent:
The power consumption of the appliance exceeded the maximum
allowable 15 Amps.
Self-help: Make sure the appliance is connected to the mains
voltage indicated on the rating label.
Electronic control of low voltage:
An error has occurred in an electronic circuit of the appliance due
to low voltage (< 160 V~).
Self-help: Make sure the appliance is connected to the mains
voltage indicated on the rating label.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT3408IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT3408IN in the language / languages: English, German as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info