714275

Rommelsbacher CT2215IN Manual

30
Zoom out
Zoom in
Previous page
1/32
Next page
30
Before cleaning, always pull the mains plug!
Before cleaning, always let the appliance cool down.
• Remove any coarse residues from the glass ceramic plate by means of a special glass scraper,
which is available in the specialised trade and in household equipment shops.
• Following that clean the cold glass surface with a damp cloth and some dishwater and wipe it
dry with a clean cloth or kitchen tissue. On the market there are suitable cleaning agents for
glass ceramic cooktops available with which the whole glass surface is treated by means of a
kitchen tissue until there is no soiling visible anymore.
• Never immerse the appliance into water and do not use steam jet appliances.
• Make sure no water or steam may infiltrate the appliance from below either.
• Never use abrasives, steel wool or sharp, scratchy objects.
• If there is any dirt visible in the area of the ventilation slots, it can be removed from the out-
side by means of a vacuum cleaner.
The electronic control features several internal monitoring functions. If an error occurs, the
power supply will be quit and an error code will appear on the display.
Error code table:
E1 Electronic control of low voltage: An error has occurred in an electronic circuit of the
appliance due to excessively low voltage (< 160 V~).
Self-help: Make sure the appliance is connected to the mains voltage indicated on the
rating label.
E2 Electronic control of excess voltage: An error has occurred in an electronic circuit of the
appliance due to excessively high voltage (> 270 V~).
Self-help: Make sure the appliance is connected to the mains voltage indicated on the
rating label.
E3 Control unit: An error has occurred on the IGBT control unit of the appliance.
Self-help: Not possible – the appliance must certainly be forwarded to the customer
service.
E4 Short circuit: A short circuit was caused in an electronic circuit of the appliance.
Self-help: Not possible – the appliance must certainly be forwarded to the customer
service.
E6 Temperature sensor: The temperature sensor underneath the glass ceramic plate is
defective.
Self-help: Not possible – the appliance must certainly be forwarded to the customer
service.
Error codes
Cleaning and maintenance
NOTE: If the waste heat of the pot creates a temperature on the cooking zone of more than
50 °C the display “temp” (7b) shows “-H-“ for HIGH. As soon as the temperature has sunk below
50 °C, the display “temp” (7b) shows “-L-“ for LOW.
When the unit is disconnected from the mains the display “temp” (7b) expires.
NOTE: It is normal for the fan to continue running in the standby mode after a long operation time.
… 30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT2215IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT2215IN in the language / languages: English, German as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info