490020
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
Safety functions
Your cooking plate features many safety functions protecting you as user and also the appliance
from accidental or dangerous operation situations.
Automatic switch-off
If there is no further input within 10 seconds after switch-on, the control switches automatically
back to the off mode.
Safety switch-off at continuous application
If one or several sensors are applied for more than 12 seconds (e. g. by objects or spilt food on
the operating panel), there will be an audible error indication (warning signal) and the cooking
zones will be automatically locked (mode “Automatic locking”).
Self-help: Remove the reason for the continuous application. The appliance can be put into
operation again afterwards.
Residual heat indication
The residual heat indication warns you after switch-off from the hot cooking
zone, but also advises you of the residual heat which can be used.
The display shows the symbol “H”. Do not touch the hot cooking zone!
The residual heat indication remains active also in off mode.
Child-proof lock
The child-proof lock allows for locking the sensors in order to avoid any accidental change of the
settings. The control continuous working in the previously set mode (also in off mode), however,
no other sensors – except for the ON/OFF sensor for switching the appliance off – can be opera-
ted any more. The child-proof lock remains also active in off mode.
Activating the child-proof lock
By simultaneously applying the MINUS sensor (of the left cooking zone at the
double cooking plate) and the DUAL-CIRCUIT sensor and holding them for ca. 3
seconds, the whole control will be locked. An “L” in the display and a signal tone
indicate the active locking as soon as a sensor is applied.
Deactivating the child-proof lock
For deactivating the lock and for realising all sensors, the MINUS sensor and the DUAL-CIRCUIT
sensor must be again simultaneously applied and held for ca. 3 seconds. A signal tone is audib-
le, the indication “L” distinguishes.
Afterwards, the previous setting or “H” for residual heat appears and all sensors can be opera-
ted again.
Switching-off by means of the ON/OFF sensor while the child-proof lock is active
If the control is completely switched off by means of the ON/OFF sensor while the child-proof
lock is active, all displays distinguish but the residual heat indication “H” might glow.
Switching the appliance on again is only possible after deactivating the child-proof lock (see
above)!
After pulling the mains plug, the child-proof lock will not be active any more!
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT2203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT2203 in the language / languages: English, German as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info