490020

Rommelsbacher CT2203 Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
14
Operating modes
• Keepthepowercordawayfromhotsurfaces,sharpedgesandmechanicalforces.Checkthe
power cord regularly for damage and deteriorations. Damaged or entangled cords increase
the risk of an electric shock.
• Fordisconnectingtheappliancefromthemains,onlyusetheplug,neverthecord!
• Thiselectricalappliancecomplieswiththerelevantsafetyregulations.Incasetheappliance,
the power cord or the sealing is damaged or the glass surface is broken, immediately pull the
mains plug.
Attention! Hazard of burns! During use, some areas will become hot. These can still exist after
switching off the appliance. Be aware of the hazard of burns when touching the appliance.
• Repairsmaybeeffectedbyauthorisedspecialistshopsonly.Improperrepairsmayresultin
considerable dangers for the user.
• Improperuseandnon-observanceoftheinstructionmanualwillvoidallwarrantyclaims.
Off mode
The control is not active and all displays are off. A possibly existing residual heat will be indica-
ted, thus, there is still mains voltage.
Operating mode
As least one cooking zone is activated and shows a cooking level (0 to 9) in the display.
Locking mode
The control is locked, only the ON/OFF sensor can be applied to switch the appliance off. The
display will show an “L” (lock) if a sensor is applied.
Manual locking:
By simultaneously applying the sensors “DUAL CIRCUIT” and “MINUS” (at the double
cooking plate the MINUS of the left cooking zone), a child-proof lock can be activated
(see also point “Child-proof lock”).
Automatic locking:
As soon as the control recognises a fault, all cooking zones will be switched off and
the control will be locked. The display will show an “F” (fault). As soon as the fault is
removed, the locking will be removed.
Cooking with your cooking plate
ON/OFF sensor (main switch)
The ON/OFF sensor is for switching the control or the complete appliance on and
off.
Switching the control on
• ApplytheON/OFFsensorfortheperiodof1seconduntilashortacknowledgementtone
sounds. The touch control electronic switches on and changes from the off mode to the opera-
ting mode. The glowing “0” in the 7-segment display shows you that the appliance is switched
on. (This indication might be pushed into the background by the indication of residual heat or
an error code).
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT2203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT2203 in the language / languages: English, German as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info