-Remove the machine from its packaging and place it on a stable work surface,
near to a mains plug.
-Remove the protective wrapping from the handle (carefully read the user
precautions printed on the wrapping.
-Remove the pod basket (7) from the machine and remove the filter (12) and the
starter pod (14) it contains. SAVE THE STARTING POD, IT WILL BE USEFUL LATER
-Remove the protective wrapping from the handle (carefully read the user
precautions printed on the wrapping.
-Put back the pod basket (7), the cup holder (9), and the cup holder insert (10).
-Rinse the water tank (6) and tank lid (5) with tap water.
-Rinse the filter (12) with tap water.
-Place the filter (12) in the water tank (6), in the slot provided for this purpose (push
right to the back – see Filter replacement chapter on page 23).
Then:
1 - Fill the tank with fresh water (
6
).
2 - Plug in the power cable (
13
).
3 - The central light (
2
) will display 3 colours (blue, white and red) one after the other, and
then go out. The machine is now on stand-by.
4 - Press coee button (
3
) or (
4
) to start heating (both coee buttons flash).
5 - When the machine reaches the required temperature, the two coee buttons (
3
)
and (
4
) will stay ON steady.
6 - Use the starter pod (
14
) provided with your machine, previously collected in the pod
basket (
7
).
7 - Pull on the machine handle (
1
) to maximum while lifting to reveal the pod slot.
8 - Insert the starter pod (
14
), whatever side, in the slot and check positioning.
9 - Push the handle (
1
) towards the control buttons until completely closed.
You will need a container with a capacity of 0.5 l or more for the following operations.
Place this container under the machine coee spout to catch the rinsing liquid.
10 - Press the Large Coee button (
4
). The light on the selected button will flash slowly
and the other button will go out. Initial rinsing will start. Rinsing will stop automatically
at the end of the cycle. Repeat the operations twice to finalise rinsing.
11 - After the machine has been rinsed, raise the handle as far as possible (
1
) while pulling
towards you, the starter pod (
14
) will then fall into the used pod basket (
7
). Pick up
the starter pod (
14
) and save for later use, dispose of the liquid in the pod Basket (
7
),
and dispose of the liquid in the container used to catch the rinsing liquid. Refit the pod
Basket (
7
) in place.
After the machine has been rinsed, it can be used normally.
NOTE: If the machine is not used for more than 48 hours, we recommend repeating steps NOTE: If the machine is not used for more than 48 hours, we recommend repeating steps
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Rombouts RMB-10443 EOH - The perfect Espresso at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Rombouts RMB-10443 EOH - The perfect Espresso in the language / languages: English as an attachment in your email.
The manual is 2.39 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Rombouts RMB-10443 EOH - The perfect Espresso
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
