597869
79
Zoom out
Zoom in
Previous page
1/88
Next page
79
TROUBLESHOOTING
Problem Cause Remedy
Camera does not work Camera switched off Set master switch to or
No battery or battery exhausted Insert battery or recharge
Camera does not work, Grip of magazine drawslide not pulled down Pull grip of magazine fully down
magazine displays all the way
Lens not fully locked Lock lens
Film does not wind up to frame 1 Film leader curled or loose Insert again, if necessary wind leader
tightly by hand when inserting
- - - - - - displayed with PQ lens B or T set Select defined shutter speed
Camera does not fire immediately “Self-timer” custom function enabled Disable self-timer
Focusing screen without view-finder image Mirror locked up Press shutter release and, if necessary,
repeat light metering
View-finder image unsharp at Focusing screen improperly positioned or Insert screen properly (matted side facing down)
unlocked and press frame tightly
Magnifier unsuited for user‘s vision Use correct magnifier
(available from +2.5 to -4.5 dpt)
Shutter does not release With focus priority, autofocus (set to “Single“) is Set switch
54
to “M“ or “C“ or make
unable to focus due to difficult contrast repeat measurements on the same detail at
situation identical distance
Shutter does not release, but Battery power insufficient; Change or recharge battery
preceding light metering okay camera switches off
Battery exhausted prematurely Ambient temperature too low Keep battery warm, recharge or use
spare battery
Camera switches off during film winding or Film base too stiff, e.g. after storage Bring film (and camera) to right temperature,
advance use fully charged spare battery
Film inserted improperly Wind up film uniformly
Camera switches off during serial photography Insufficient battery power Use fully charged battery, if possible
No fill-in flash with dedicated flash Fill-in flash output not preselected Set output on exposure-compensation switch
from -1/3 EV to -3 EV (compensating) or
from +1/3 EV to 2 EV (additive)
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Rolleiflex Hy6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex Hy6 in the language / languages: English as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info