597872
106
Zoom out
Zoom in
Previous page
1/112
Next page
..............................................................................
..............................................................................
106
Auto ash
OTF TTL ash metering by special Si pho-
todiode; display of ash readiness and
exposure in view nder. Working range ISO
25/15° - 1600/33°. Selection of leading
or trailing sync. Fill ash in any automatic
exposure mode.
Flash synchronization
At all speeds from 1/1000 s (PQS) or 1/500
s (PQ) down to 30 s. Hot shoe with con-
tacts for dedicated ash units (SCA 3000).
Rollei SCA-3562 Flash Adapter.
Shutter release
At right-hand front of camera and on
shutter-speed dial. Additional cable-release
and remote-control sockets. Self-timer,
interval adjustable with control software
from 1 s to 99 s.
Instant shutter release
Time lag between depression of shutter
release and opening of shutter (PQ lenses)
approx. 3 4 ms, with PQS lenses approx.
2 ms. Automatic readiness after every
exposure is possible. Release lag can be set
from 1 ms to 99 ms with MasterWare.
Depth-of- eld preview
By depression of a button, in any exposure
mode.
Mirror lockup
In any exposure mode, with AE lock and
display. Shutter speed, ISO speed and
exposure compensation can still be varied
after lockup.
Lens mount
Rollei bayonet mount. 10-pin contact bar
for signal transfer for aperture and shutter-
speed drives. Exposure control fully func-
tional even with bellows unit, extension
tubes and reversing adapter.
Lenses
Zeiss and Schneider interchangeable lenses
of PQ and PQS types using all operating
modes with full-aperture metering, possi-
bility of switching to stop-down metering
for depth-of- eld preview. Schneider auto-
focus lenses (6008 AF).
Zeiss and Schneider lenses without PQ
characteristics can also be used (with stop-
down metering only).
Multiple exposures
Film advance can be disengaged in ME
position of camera switch; view nder
image always visible. With MasterWare, up
to 10 multiple exposures in 1/10 s.
Re ex mirror
Instant-return mirror with partially trans-
mitting multicoating and pneumatic brake;
can be locked up.
View nder system
Standard folding focusing hood with
ip-up interchangeable magni er; can be
exchanged for 45° prism nder, rigid
magnifying hood or 90° telescopic nder.
Interchangeable focusing screens.
View nder display
Shutter speed and aperture in one-third
increments, focus, metered-manual null
balancing, exposure compensation, spot/
multi-spot, AE lock, ash readiness, ash
exposure, battery status. Automatic rever-
sal of display with 45°/90° nders.
Automatic brightness control, individual
brightness setting of display with Master-
Ware.
SPECIFICATIONS
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Rolleiflex 6008 integral 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex 6008 integral 2 in the language / languages: English as an attachment in your email.

The manual is 14,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info