Manual Rollei Rolleiflex 6008 integral 2 (page 76 of 112) (English)

597872

Zoom out

Zoom in

1/112

..............................................................................

Preﬂ ash (manual aperture control)

First apply the preﬂ ash custom function

(“SF PrE“) to switch 31, then switch this

on. See “Custom functions“. The preﬂ ash

mode is based on the spot sensor incorpo-

rated in the reﬂ ex mirror. Therefore posi-

tion the subject to be metered in the

center of the focusing screen for optimum

exposure.

Pressing the shutter release will set the

working aperture and initiate a release

cycle without actual exposure or ﬁ lm

advance. The light balance displays the

exposure value determined. Vary the aper-

ture or the ﬂ ash output and repeat the

preﬂ ash until the light is balanced, that is,

until only the large central line is visible.

If the reading is away from correct expos-

ure by no more than 1 EV (light balance

should not be blinking!), proper exposure

may be determined without renewed

metering, by simply varying the f-stop.

If the difference exceeds 1 EV, be sure

to repeat the reading, since the metering

range has been exceeded and subsequent

adjustment is impossible. Finally, use

switch 31 to terminate the custom-func-

tion setting.

To ensure proper metering, be sure to

avoid stray light on the focusing screen.

Note:

Contrary to TTL ﬂ ash metering, the pre-

ﬂ ash mode is restricted to a ﬁ lm-speed

range of ISO 25/15° - 800/27° and is not

available in any of the automatic exposure

modes. In this case, the display will read

“no Auto“.

FLASH PHOTOGRAPHY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex 6008 integral 2 in the language / languages: English as an attachment in your email.

The manual is 14,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rollei Rolleiflex 6008 integral 2 Manual

Product: