Manual Rollei Rolleiflex 6008 integral 2 (page 52 of 112) (English)

597872

Zoom out

Zoom in

1/112

..............................................................................

Mirror lockup

Camera shake is a major problem above

all with long-focus lenses and in close-up

work. A suitable remedy is mirror lockup.

To do this, brieﬂ y press knob 73 “mirror“:

The reﬂ ex mirror will swing up; then press

the shutter release. The release lag is just a

few milliseconds.

If there was no previous AE lock – by lock-

ing memo button 27 or multi-spot meter-

ing –, the exposure value determined at

the instant of mirror lockup will be put in

memory.

After mirror lockup, the camera will

remain active for an additional four min-

utes. Be sure not to make any exposure

adjustment after mirror lockup because

the exposure meter is then inactive. The

measured values are put in memory if

the camera is switched off via the master

switch or if it turns off on its own.

If no further exposure is desired with

mirror lockup: Set multi-exposure knob

45 to “ME“ (ﬁ lm advance disengaged) and

trigger the camera with its lens capped.

The reﬂ ex mirror will swing down again,

and no frame will be lost. Then reset

knob 45 to “SE“.

Note:

In the case of the type 4560 magazine,

ﬁ lm advance is engaged or disengaged

directly on the magazine. See Operating

Instructions of magazine.

MIRROR LOCKUP

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex 6008 integral 2 in the language / languages: English as an attachment in your email.

The manual is 14,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rollei Rolleiflex 6008 integral 2 Manual

Product: