Manual Rollei Rolleiflex 6008 integral 2 (page 35 of 112) (English)

597872

Zoom out

Zoom in

1/112

..............................................................................

Switching the camera on and off

With its master switch 1 set to “off“, the

camera circuits are dead, and the camera

cannot be inadvertently activated by oper-

ating one of its controls.

After setting the camera to one of the

ﬁ lm-advance modes “S“ (single frames),

“C“ (continuous shooting) or “S±“ (brack-

eting), it can be activated with the aid of

the memo button, one of the shutter but-

tons, the stop-down button or the mirror-

lockup button. As long as the camera is

inactive, the display will remain blank.

In its default setting (that can be changed

with MasterWare), the camera remains

active for 40 seconds. The use of any of its

controls will extend this period by another

40 seconds. In the multi-spot mode and

when the memo button is locked in, the

camera will remain active for an additional

four minutes.

Single frames

With the master switch set to “S“, a single

frame will be exposed whenever the shut-

ter release is pressed. For another expo-

sure, ﬁ rst release the button, then press it

again.

Continuous shooting

With the master switch set to “C“,

the camera will expose one frame after

another for as long as the shutter release

is kept depressed. The maximum shooting

speed is about two frames per second (fps)

at normal temperature (20°C), with a full

battery and at shutter speeds faster than

1/250 s.

FILM ADVANCE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex 6008 integral 2 in the language / languages: English as an attachment in your email.

The manual is 14,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rollei Rolleiflex 6008 integral 2 Manual

Product: