Manual Rollei Rolleiflex 6008 integral 2 (page 30 of 112) (English)

597872

Zoom out

Zoom in

1/112

..............................................................................

Removing the ﬁ lm

After the last frame, wait for the ﬁ lm

advance and wind-up to ﬁ nish and “End“

to appear in the display. Then close the

laminar drawslide (grip in direction of

arrow “magazine change/remove insert“).

Open the magazine back, remove the

insert and take out the ﬁ lm. If necessary,

replace the ﬁ lm insert and close the

back until it engages. It is advisable to

remove the magazine from the camera

before removing the ﬁ lm. (See paragraph

“Removing/changing magazines“.)

Note:

Before opening the magazine back 35,

pull grip 49 fully in the direction of the

arrow “magazine change/remove insert“,

or the drawslide may be damaged!

Setting the ﬁ lm speed

Engage dial 37 in the position for the ISO

speed concerned. The dial must be in one

of its click stops!

Film speed can be set over a range of ISO

25/15° to 6400/39°, which covers prac-

tically all the emulsions available in the

world.

If the ﬁ lm speed is changed with the

camera switched on (!) or if magazines

with different ISO settings are attached to

the camera, the corresponding ISO value

will be displayed for about one second,

e.g. 25 – 32 – 40 … 4000 – 5000 – 6400,

preceded by “Sn“ (for sensitivity).

REMOVING THE FILM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex 6008 integral 2 in the language / languages: English as an attachment in your email.

The manual is 14,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rollei Rolleiflex 6008 integral 2 Manual

Product: