Manual Rollei Rolleiflex 6008 integral 2 (page 26 of 112) (English)

597872

Zoom out

Zoom in

1/112

..............................................................................

Changing fuses

Remove battery and pull fuse 9 out of

its holder. The open slide 39 exposes the

spare fuse 38. Press this down into the

holder so that it clicks into place. Close

slide 39.

Suitable fuses – 1.25amp/250V, slow-blow

– are commercially available.

To avoid damage to the camera, never use

fuses of higher rating!

Should the spare fuse blow too, try to

locate the cause (e.g. ﬁ lm-loading error,

especially ﬁ lm running off the spool; ﬁ lm

torn at low temperature or come off paper

leader.) If the trouble cannot be located,

please contact Rollei Service.

Attaching the handgrip

To avoid unintentional shutter tripping

when attaching the grip, set the master

switch to “off“. Turn shutter-speed dial

23 to < > and hold it in this position.

Insert holding pin 66 of grip 21 fully

into the opening in the shutter-speed dial.

Let go of the dial so that it resets from its

< > position.

The grip is now ﬁ xed to the camera. To

remove the grip, proceed in the reverse

order.

CHANGING FUSES

39388

21 2266

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex 6008 integral 2 in the language / languages: English as an attachment in your email.

The manual is 14,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rollei Rolleiflex 6008 integral 2 Manual

Product: