Manual Rollei Rolleiflex 6008 integral 2 (page 22 of 112) (English)

597872

Zoom out

Zoom in

1/112

..............................................................................

CHARGING THE BATTERY

Charging the battery

Plug the power-supply cable a into the AC

terminal b of the charger and connect it

to the AC supply. The green LED indicates

readiness. All normal AC voltages and fre-

quencies are suitable:

» 100V – 240V AC, 50 Hz – 60 Hz.

The power-supply unit has protective insu-

lation and conforms to the pertinent

EU safety regulations. It comes with a

1.25amp slow-blow fuse. Its outputs (bat-

tery pins, terminals) are protected against

short circuits due to defective batteries

or metallic objects. Battery temperature is

monitored and limited.

Note:

Be sure to prevent bare metallic objects

from entering the battery slot and use the

unit exclusively in a dry environment.

Place battery 8 with its contacts onto the

pins in the charger slot. Rapid charging

will start after about 2 s, and the red LED

glows. Cutoff voltage and battery tem-

perature are monitored during charging.

At the cutoff voltage, the unit switches

to trickle charge. If the battery voltage

exceeds the admissible maximum, the red

LED will go out and rapid charging is inter-

rupted until the temperature is back to

normal.

Trickle charging is in progress when the

green and red LEDs are blinking. This

makes up for the spontaneous discharge

of the battery so that the latter may be left

in the charger over prolonged periods.

Ambient temperature: approx. 5°C to

35°C. The overall duration of the charging

cycle depends on battery condition. After

normal discharge, about one hour or less

is sufﬁ cient.

d e

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex 6008 integral 2 in the language / languages: English as an attachment in your email.

The manual is 14,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rollei Rolleiflex 6008 integral 2 Manual

Product: