597866
30
Zoom out
Zoom in
Previous page
1/38
Next page
Re-adjusting the Exposure Meter
When the photo cell is completely covered, the
indicator needle should be in zero position, pointing
to the red reference line 3. If it is off this position,
perhaps due to prolonged and heavy shaking, the
meter can be re-adjusted as follows:
Loosen both screws on the front of the meter 1, until
it can be removed from the focusing knob. Turn
adjusting screw on back of instrument 2 until meter
needle points to the red reference mark 3.
IMPORTANT! Before re-inserting instrument: first
set camera to DIN / ASA value 12, filter factor 0,
shutter speed 1/500th sec. and diaphragm f:22, then
insert exposure meter and tighten screws.
Table of Exposure Values
In case you are interested in knowing which exposure
value (formerly light value) corresponds to a given
speed/stop combination, the table on the camera back
provides this information: determine diaphragm and
shutter speed the camera is set to and the exposure
value will be found where the respective diaphragm
and speed columns cross; for example: for f : 5.6 and
1/30th sec. the exposure value 10.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Rolleiflex 2.8F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rolleiflex 2.8F in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info