16043
50
Zoom out
Zoom in
Previous page
1/91
Next page
50
Loading the film
1. To open the camera back, press the release button
as shown in Fig. 3.
2. Insert the film cartridge in the film compartment. Don’t
use any force.
3. Pull out the leading edge of the film to the start mark
on the right side of the camera as shown in Fig. 4.
Keep the film flat.
If you have pulled too much film from the cartridge,
remove the cartridge from the film compartment and
carefully wind back the film.
IMPORTANT:
Light may damage the part of the film on which the
first frame is exposed. As a precaution take two pho-
tographs of the first subject.
4. Close the camera back. Make sure you hear it click in
place.
5. The film is automatically advanced to the first frame.
The “film loaded” indication appears in the LCD panel.
6. Once the film has been advanced to the first frame,
<1EX> is displayed in the picture counter in the LCD
panel.
7. If < E > flashes in the LCD panel and the shutter re-
lease remains locked, that means the film was in-
serted incorrectly. Open the camera back and put the
film in again.
Observations
With DX-coded films, the camera adjusts automati-
cally to the correct film speed between ISO 50 and
3200.
If the film is not DX-coded, the camera automatically
sets a film speed of ISO 100/21°.
Display signaling film-loading-error
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Prego145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Prego145 in the language / languages: English, German as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info