16013
48
Zoom out
Zoom in
Previous page
1/72
Next page
48
Loading the film
1. Push catch in the direction of the arrow, open cover.
2. Drop the film cartridge into the film chamber.
3. Press the cover until it clicks in place. The camera
automatically advances the film to the first frame.
4. The film speed and the total number of frames are shown
in the LCD display. (After 2 seconds the date is displayed
instead of the film speed)
5. If the film is not advanced properly, the E symbol flashes
in the LCD display. If this happens, re-load the film as
described.
LOADING THE FILM
Please note
This camera is suitable for APS films (IX-240)
The cartridge shows the film status.
unexposed
partially exposed
fully exposed/unprocessed
processed
The cartridge must show the / symbol (Nano 80) or
the
symbol (Nano 60) . The camera does not accept
other films (symbols
, , ).
Only load the film when the battery is in the camera.
Only open the film chamber after rewinding the film.
Do not use force to close the film chamber.
The camera sets the film speed automatically.
Examples of film speeds
I-200(ISO 200)/I-400 (ISO 400)
The frame counter counts backwards and shows the
number of shots left.
unexposed
partially exposed
fully exposed/unprocessed
processed
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Nano60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Nano60 in the language / languages: English, German as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info