574283
38
Zoom out
Zoom in
Previous page
1/190
Next page
38
2
Shooting Still Images
When taking still images, Shooting Mode is
usually used.
There are two methods of using the shutter
button, pressing the shutter in two stages
(half-press) and pressing it all the way down
at once (full-press).
When you use half-press, you can confirm
that your shot is in focus on the LCD Monitor.
When you want to capture the moment, full-
press is convenient.
When shooting in Aperture Priority/Manual
Exposure Mode, the f-number (aperture
value) and shutter speed remain displayed
in the bottom part on the screen. According
to the f-number, the shutter speed is deter-
mined for shooting.
In Aperture Priority/Manual Exposure
Mode, you can also set the shutter speed
manually for shooting (Manual Exposure
Mode).
For how to shoot with Zoom, see P.46
For how to shoot Close-ups, see P.48.
For how to shoot with Aperture Priority/
Manual Exposure Mode, see P.55.
Checking the Focus and Shooting
(Half-press)
1. Turn the mode dial to 5
55
5 (Shoot-
ing Mode) or A/M (Aperture Pri-
ority/Manual Exposure Mode).
2. Compose your shot either by
looking through the Viewfinder
or at the LCD Monitor.
3. Put the subject of your photo
right in the center and press the
shutter button half-way.
The f-stop (aperture size) and shutter
speed are displayed in the bottom part of
the screen, and the camera focuses.
Once the shot is in focus, the exposure
and white balance are fixed and the
crosshair in the center of the LCD Moni-
tor turns green, as does the auto-focus
lamp in the lower left of the Viewfinder.
Check one of these to make sure the
subject is in focus.
4. Gently press the shutter button
all the way.
The still image you have taken freezes
for a moment on the LCD Monitor and is
recorded.
To prevent blurring, press the shutter
release button gently.
The mark indicates that blurring may
occur. Secure the camera firmly and adjust
the focus again.
When shooting in a dark place, the AF aux-
iliary lamp may flash to raise the focusing
performance. If the flash is switched to off,
the AF auxiliary lamp does not flash.
When the image confirmation time is set to
OFF, the still image you have taken does
not appear on the LCD Monitor. See P.115.
Downloaded from www.Manualslib.com manuals search engine
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei DR5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei DR5100 in the language / languages: English as an attachment in your email.

The manual is 9,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info