104175
20
Zoom out
Zoom in
Previous page
1/39
Next page
38
This is how it works: This is how it looks: This is what its for:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail info@rollei.de
39
This is how it works: This is how it looks: This is what its for:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail info@rollei.de
Automatic exposure
control
The camera automatically
controls the exposure of
your digital photos with an
equivalent sensitivity of ISO
100/21°.
Programmed AE will
automatically select shutter
speeds from 2 s to 1/500 s
and apertures of f/3.4, f/4.8,
f/7.7 and f/15 (wide-angle)
as well as f/3.6, f/4.8, f/7.7
and f/15 (telephoto).
Press the MENU button on
the camera back and use the
four-way control to select
Exposure. In the Area
submenu you may select
Full, Central or Spot using
the four-way control
(pressing the Right arrow
̈).
A blinking red lamp beside
the viewfinder eyepiece
warns against camera shake
(when the flash is off) and
recommends use of a tripod.
To lock in exposure settings,
press and hold the shutter
release in its halfway
position. This allows pinpoint
exposure control in the case
of high subject contrast.
In its default setting, the
camera averages exposure
over the entire field.
However, for certain
subjects, such as portraits
against a bright background,
you may also switch to
center-weighted metering.
Spot metering in turn is ideal
for precise metering of
important subject details.
For pinpoint metering, use
AE lock with the shutter
release depressed halfway.
Exposure compensation
Automatic exposure can be
compensated over a range
of +2.0 to 2.0.
Press the MENU button on
the camera back and use the
four-way control to select
the Exposure mode. In the
EV subprogram you then
can choose between the
following compensation
values: +2.0, +1.5, +1.0,
+0.5, -0.5, -1.0, -1.5 and
2.0. Press the Right arrow
̈ of the four-way control
to make your selection.
Experiment with exposure
compensation to optimize
your digital images. Slight
compensation (for example
by +/- 0.5) may be useful,
above all if you wish to print
out your pictures directly, i.e.
without subsequent
manipulation by PC
image-processing software,
be it on your own printer or
through an Internet printing
service, since different
printers and printer software
interpret digital images
differently (and might print
your pictures too bright or
too dark).
Note: If you wish to avoid
flash in low light, a certain
amount of underexposure
may give you shake-free
images because the camera
will then use a faster shutter
speed. PC image-processing
software is capable of
correcting such under-
exposure.
Taking pictures Mode dial set to Camera icon Mode dial set to Camera icon Taking pictures
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei D 33 COM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei D 33 COM in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info