104175
10
Zoom out
Zoom in
Previous page
1/39
Next page
18
This is how it works: This is how it looks: This is what its for:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail info@rollei.de
19
This is how it works: This is how it looks:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail info@rollei.de
:
Your camera uses four size
AA alkaline batteries of four
NiMH batteries or four
rechargeable batteries, type
NiCd.
Should you use rechargeable
batteries, make sure that
these have been fully
charged in a suitable
charger.
Always turn the camera off
before loading or exchang-
ing batteries.
Open the battery compart-
ment by pushing its cover in
the direction shown (1), then
open the flap (2).
Load the batteries in
accordance with the +/-
marks.
Loading alkaline or
rechargeable batteries
The camera should prefer-
ably be used with high-
capacity NiMH batteries.
After changing batteries,
check whether the built-in
clock is set to the correct
date and time.
If the camera is without
power supply for over five
minutes, the clock may be
slow or it may reset. In this
case, set date and time.
Left without power supply
for a prolonged period, the
camera will forget
individual settings and reset
to default values.
However, the pictures stored
on your memory card will
not be lost.
Do not put the camera
down with the battery
compartment open to
prevent damage to its cover.
Be careful when changing
batteries that may get hot in
use.
Checking battery power
With batteries loaded, the
camera will automatically
check their status and
display it on the LCD
monitor.
lit
Full power.
lit
Declining battery power, but
the camera is fully opera-
tional.
If the display disappears,
followed by the battery icon
blinking for five seconds and
disappearing once more,
battery power is insufficient
for camera operation.
Replace all batteries by fresh
ones, or use the optional
power-supply unit.
If the LCD monitor is blank,
replace all batteries and
make sure they are inserted
with their +/- poles properly
oriented.
If left unused for three
minutes, the camera will
automatically switch off to
save power. To resume
operation, press the power
switch.
If you wish, you may select
intervals of 1, 5, 10 or 30
minutes for automatic cutoff.
When the optional power-
supply unit is used or when
the camera is connected to a
PC, the cutoff interval is
always 30 minutes and
cannot be varied.
Power supplyPower supply
This is what its for:
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei D 33 COM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei D 33 COM in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info