EN-13
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.48” LTPS-TFT LCD monitor to help you compose images,
playback recorded images/video clips or adjust menu settings.
1. Press the Power button to turn the power on.
The status LED lights green and the camera is initiated.
If the power is turned on in [8] or [w] mode, the lens will extend forward and it is
ready for shooting. In both modes, if the camera mode is changed to [x], the lens
barrel will retract into the camera body after 30 seconds.
2. Toggle the button to [8].
3. Compose your image in the LCD monitor.
Pressing the button zooms in on the subject, and
enlarges the subject on the LCD monitor.
Pressing the button provides a wider angle
image.
4. Press the shutter button.
Pressing the shutter button down halfway
automatically focuses and adjusts the exposure, and
pressing the shutter button down fully captures the
images.
The focus area frame turns green when the camera is in focus and the exposure is
calculated.
When the focus or exposure is not suitable, the frame of the focus area turns yellow.
Recording Shots Only When the Smile Happen
With the camera’s new “smile detection” function, this camera captures automatically when a
smiling face is detected. Ideal for joyful occasions, this ensures that a happy moment is never
missed.
1. Press the MENU button, and select the [Capture] menu with the e / f button.
2. Select [Scene] with the c / d buttons, and press the SET button.
3. Select [Smile Shot] with the c / d buttons, and press the SET button. The camera returns
to preview display.
4. Compose the image, and press the shutter button down
fully.
5. Once the camera detects a smile, it will automatically
capture 1 image (by default, the flash mode setting is set
to W).
When capturing group shots (the number of people is
more than 1), the camera will automatically capture
the image when it detects two greatest smile faces.
If the camera could not detect a smile within 5
seconds, the camera will automatically capture an
image.
Press the shutter button once again to reactivate this function.
S2
S1
2008 / 01 / 01
