761259
31
Zoom out
Zoom in
Previous page
1/36
Next page
31
5. Timer photography
5.3 Set the timer
1. To ensure a proper operation, select an interval of at least 1 second longer
than the exposure time.
2. To ensure that the camera has enough time to focus (when using AF), please
set the interval to 2 seconds or longer than the exposure time.
3. When using the long exposure NR function (for some digital camera only), the
interval time should be at least twice as long as the exposure time.
4. After pressing the SET button (4), the interval time will automatically be set
from 00:00:00 to 00:00:01.
5.4 Start the timer
After pressing the TIMER START/STOP button (4), the timer will start. The focus
signal is active 2 seconds before the shutter will be released, the focus light is
indicated in blue, the release light is indicated in orange.
When the shutter is turned on, the display panel shows the remaining time. If
the sound is turned on, the timer will beep at 1 second of each interval. After
each photo is taken, the remaining number will be updated.
5.5 Finish shooting
If the timer has completed the selected number of shots, the shooting will end
automatically. To stop the shooting task before all photos have been finished,
press TIMER START/STOP button (2).
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Cable remote control V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Cable remote control V2 in the language / languages: English, German as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info