761366
13
Zoom out
Zoom in
Previous page
1/18
Next page
(3)If the DPOF information of the Micro SD card has been set by another camera, please do not insert this
card into the camera to reset the DPOF information, or the DPOF information may be invalid or covered.
Sometimes, special photo types make it impossible to set the DPOF information.
7.Remote control
You can use the attached remote control to control the video recording, photo shooting, stopping and
laser function turning on/off. The red indicator on the remote control will twinkle once when you press
any of the following keys:
Please follow the steps below to code the remote control before use to realize the correspondence of
remote control and camera:
1,Turn off the camera, press and hold “Record ” key, turn the power switch to “ ON ” , and then release
“ Record" key. Press both “ Record ” and “ Stop ” key on the remote control once within 3s to finish the
remote control code pairing process. The camera will tick twice after coding the remote control
successfully.
Note:
a.Use wireless remote control to control your Rollei Bullet 3S 720P to check whether the code pairing was
successful. The control functions include:Video recording starting/stopping, photo shooting, waking in
standby mode, and laser light turning on/off; Camera will tick once for each operation. In case of video
recording stopping or laser light turning off, the camera will tick twice;
b.Remote control range: Remote control within 5 meters in any angle horizontally without barriers;
c.To press “Record”, “Shutter” or “Stop” key on the remote control in standby mode can wake up the
system;
8.Standby mode:
A.Non-voice control standby:
Push the VOX switch to “OFF” and turn the power switch to “ON”, the system will start working and it
will enter preview state after finishing initialization. In case of no any mission and operation, the system
will auto enter standby power-saving mode at the end of the auto standby time set. Press “Record” or
“Shutter” key at this time, or remote control any key on the remote control, the system will be waked up.
Note:
a:To press keys on TFT screen in standby mode cannot wake up the system;
b:The LCD segment screen does not display anything in standby mode.
B.Voice control standby:
Push the VOX switch to “ON” and turn the power switch to “ON”, the system will start working and it
will enter preview state after finishing initialization. In case of no any mission and operation, and the
environmental voice is lower than 65dB continuously, the system will auto enter standby power-saving
mode at the end of the auto standby time set. Press “Record” or “Shutter” key at this time, or remote
control any key on the remote control, the system will be waked up. When the environmental voice is
higher than 65dB, the system will wake up and enter video recording state.
Note:
a:To press keys on TFT screen in standby mode cannot wake up the system;
b:The LCD segment screen does not display anything in standby mode.
Record
Shutter
Stop
long press “Shutter” key for 3s can turn on
and turn off the laser function
-11-
EN
DE
FR
ES
EL
SV
NL
PL
RU
HU
PT
FI
NO
IT
DA
TR
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Actioncam SD20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Actioncam SD20 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rollei Actioncam SD20

Rollei Actioncam SD20 User Manual - Italian - 18 pages

Rollei Actioncam SD20 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info