761361

Rollei Actioncam 9S plus Manual

10
Zoom out
Zoom in
Previous page
1/240
Next page
10
ENGLISH
Parameters for the camera in photo mode:
• Photo Resolution: Here you can set the resolution of your pictures.
• ISO: The ISO value can be adjusted automatically or set manually between 100 and 3200.
• EV: You can set the exposure compensation between -2.0 (image becomes darker) and +2.0 (image becomes
brighter).
• Timelapse Interval: You can set different intervals to determine the speed of time lapse shooting.
• Timelapse duration: You can determine the duration of your time-lapse recording here.
• Photo Burst: Here you can set how many series pictures you want to take in one time sequence.
• Delay Timer: This function describes the self-timer that you can set here.
• Long Exposure: Here you can set the extended exposure time of the photo.
• Metering: Here you can set the image area on which the camera focuses, e.g. in the center (Center), at
different locations (Multi) or at one point (Spot).
• Date Stamp: Here you can give your photos a date stamp or a date & time stamp.
System settings:
• Power Frequency: Set the frequency of your ambient light to get the best results.
• Sounds: Here you can turn on and off the shutter sound, boot up sound, and key beep sound, and vary their
volume.
• White Balance: Set different white balance settings for optimal recordings. There is also a white balance for
underwater shots.
• Effects: Here you can apply various filters to your images.
• Distortion Calibration: Use this function to straighten out the distortion at the edge of the image caused by
the wide-angle lens.
• Date & Time: Set the date and time here.
• Display Flip: This function rotates the display 180° to allow the camera to be operated upside down.
• Screen Saver: Set to turn off the display automatically after a certain time.
• Auto Power Off: Sets the camera to turn off automatically after a certain time.
• Power On Auto Record: This function automatically starts recording a video directly when the camera is
turned on with the previously set settings.
• USB: Set whether the camera is recognized as a removable disk (MSDC – mass storage device class) or
webcam (PCCAM) when connected to a PC via USB.
• Language: Change the language of the camera menu here.
• Format Card: Format your memory card here, e.g. after a firmware update.
• System: Here you will find the function to reset the camera to factory settings, as well as information on the
firmware (system info) and your memory card (card info).
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Actioncam 9S plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Actioncam 9S plus in the language / languages: All languages as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info