581837

Rollei ActionCam 100 Manual

5
Zoom out
Zoom in
Previous page
1/9
Next page
> Motion-detect recording loop coverage: when the TF Card is fully loaded, will delete the former videos or
photos automatically one by one to acquire relevant space to store new videos. If the function is closed, the
camera will power off automatically when the storage space is fully loaded.
> Lasting time of video recording and motion-detect recording loop coverage function can be amended by the
system settings, please refer to the system setup instruction.
Note:
1、When not used underwater, please open the waterproof plug for better audio recording quality.
2、When the TF Card is full (the loop coverage function closed) or battery used up, the unit will shut down
automatically.
3、Enter into this mode, if you don’t operate the unit for 3 minutes,, LED light will turn off, the camera is still at
work, press any key to instruct.
6. Motion-detect photo taking
> When the camera captures mobile objects, it will take a photo automatically.
> Motion-detect photo taking loop coverage: when the TF Card is fully loaded, it will delete the former videos or
photos automatically one by one to acquire relevant space to store new videos. If the function is closed, the
camera will power off automatically when the storage space is fully loaded.
Note:
1. When the Memory Card is full (the loop coverage function closed) or battery used up, it will shut down
automatically.
2. Enter into this mode, if you don’t operate the unit for 3 minutes, LED light will turn off, the camera is
still at work, press any key to instruct.
7. Turn on the led light
The camera provides 8 bright white LED lights. Please turn on it as below:
Short press" LED light key
" in the state of any mode (except TV-out playback mode), the LED light will circle
in 3 modes;
Mode1: Turn on the 8 white LED lights, you can record your videos in color even in totally darkness.
Mode2: Turn on 4 LED white lights, Brightness abates and it can reduce power consumption.
Mode3: Turn off all the white LED lights.
Note: Press and hold down the led light " " to turn off all the led functions. The camera will shake when it is
operated successfully.
8. Turn off and automatic turn off
In the standby mode, press and hold down the "power key" for two seconds, the blue light flashes 3 times and
goes out, and then release your hand. At the mean time the camera shakes for twice, and then turns off the camera.
Note: The camera will turn off automatically when the TF Card is fully loaded( the loop coverage function
closed)、the battery is used up, the AV cable is disconnected, or there is no operation after 3 minutes, the red&blue
light will flashing alternately when you turn off the camera.
9. Down load a video and removable disk.
> Please turn off the camera first, and then connect it with computer.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei ActionCam 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei ActionCam 100 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info