597855
16
Zoom out
Zoom in
Previous page
1/53
Next page
16
DGBF
Filmempfindlichkeit einstellen
Bei DX-codierten Filmen erfolgt die Ein-
stellung automatisch zwischen ISO 25
und 5000. Bei nicht DX-codierten Fil-
men wird automatisch ISO 100/21°
verrechnet. Wird eine andere Film-
empfindlichkeit gewünscht, so kann
diese auch bei DX-codiertem Film wie
folgt verändert werden:
Taste P DRIVE solange betätigen, bis
das Symbol ISO im LCD-Monitor er-
scheint. Durch Betätigung der Wipp-
Taste A läßt sich der ISO-Wert verän-
dern und durch Drücken des Knopfes
ABC speichern.
WIDE TELE
DX 6-8-10 5000-6400
Die Korrektur erfolgt in 1/3-Stufen und
umfaßt den Bereich von ISO 6–6400.
»
Hinweis: Bei Filmwechsel ist darauf
zu achten, daß der eingestellte ISO-
Wert wieder korrigiert werden muß.
Setting the film speed
With DX-coded film, the camera will set
the film speed automatically between
ISO 25/15° and ISO 5000/38°.
With non-DX-coded film, the camera
defaults to ISO 100/21°. To override
the DX setting or set the film speed
manually with non-DX-coded film,
proceed as follows:
Hold down DRIVE button P until ISO
appears in the LCD. Then press zoom
rocker A to change the ISO setting
and press ABC button for memory.
WIDE TELE
DX 6-8-10 5000-6400
Settings are possible in increments of
1/3 EV over a range of ISO 6 to 6400.
»
Note: Be sure to change the film-
speed setting and, if necessary,
reset to DX when loading a new film!
Réglage sur la sensibilité du film
Avec les films codés DX, le réglage se
fait automatiquement entre ISO 25 et
5000. Avec les films non codés DX, le
réglage se fait automatiquement à la
valeur ISO 100/21°. Si l’on désire un
réglage sur une autre sensibilité,
comme d’ailleurs avec un film codé
DX, procéder comme suit :
Appuyer sur la touche P DRIVE
jusqu’à ce que le symbole ISO
apparaisse sur l’écran ACL. Pour
modifier la valeur ISO, il faut appuyer
sur la touche à bascule A; appuyer
ensuite sur la touche ABC pour
mémoriser la nouvelle valeur.
WIDE TELE
DX 6-8-10 5000-6400
La correction s’effectue par 1/3 de
valeur entre 6 et 6400 ISO.
»
Remarque: Lors d’un changement
de film, penser à réviser le réglage
de la valeur ISO.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei 35 QZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei 35 QZ in the language / languages: English, German, French as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info