Chorus 0 Delay
Balance D
Balance D
L out
R out
Balance W
Balance W
Feedback
Balance D
Balance W
Balance W
Balance D
L in
R in
Delay
Chorus
Parameter Value Explanation
Chorus Pre Delay 0.0–100 [msec] Adjusts the time from the original sound until chorus
sounds is heard.
Chorus Rate (sync sw) OFF, ON Synchronize to the tempo of the DAW if this is ON.
Chorus Rate (Hz) 0.05–10.00 [Hz]
Frequency of modulation
Chorus Rate (note) Note
& “Note”
Chorus Depth 0–127 Depth of modulation
Chorus Balance D100: 0W–D0: 100W Volume balance between the direct sound (D) and the
chorus sound (W)
Delay Time (sync sw) OFF, ON Synchronize to the tempo of the DAW if this is ON.
Delay Time (msec) 1–2600 [msec]
Adjusts the time from the original sound until delay
sounds is heard.
Delay Time (note) Note
& “Note”
Delay Feedback -98–+98 [%]
Adjusts the proportion of the delay sound that is fed back
into the eect.
Negative (-) settings will invert the phase.
Delay HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which sound fed back to
the eect will be cut. If you do not want to cut the high
frequencies, set this parameter to BYPASS.
Delay Balance D100: 0W–D0: 100W
Adjusts the volume balance between the sound that is
sent through the delay (W) and the sound that is not sent
through the delay (D).
Level 0–127 Output Level
