603202
161
Zoom out
Zoom in
Previous page
1/183
Next page
161
MIDI Implementatie
Appendix
Decay Time (Controller number 75)
Status 2nd byte 3rd byte
BnH 4BH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Decay Time value (relative change): 00H - 40H - 7FH (-64 - 0 - +63)
Vibrato Rate (Controller number 76)
Status 2nd byte 3rd byte
BnH 4CH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Vibrato Rate value (relative change): 00H - 40H - 7FH (-64 - 0 - +63)
Vibrato Depth (Controller number 77)
Status 2nd byte 3rd byte
BnH 4DH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Vibrato Depth value (relative change): 00H - 40H - 7FH (-64 - 0 - +63)
Vibrato Delay (Controller number 78)
Status 2nd byte 3rd byte
BnH 4EH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Vibrato Delay value (relative change): 00H - 40H - 7FH (-64 - 0 - +63)
Effect 1 (Reverb Send Level) (Controller number 91)
Status 2nd byte 3rd byte
BnH 5BH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Reverb Send Level: 00H - 7FH (0 - 127)
Effect 3 (Chorus Send Level) (Controller number 93)
Status 2nd byte 3rd byte
BnH 5DH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Chorus Send Level: 00H - 7FH (0 - 127)
RPN MSB/LSB (Controller number 100, 101)
Status 2nd byte 3rd byte
BnH 65H mmH
BnH 64H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm = upper byte (MSB) of parameter number specified by RPN
ll = lower byte (LSB) of parameter number specified by RPN
<<< RPN >>>
Control Changes bevatten RPN ((Ge)Registreerde Parameter Nummers), die zijn uitgebreid.
Bij het gebruik van RPN's dienen eerst RPN verzonden te worden (Controller nummers 100
en 101; deze kunnen in elke volgorde verzonden worden), om de parameter te kunnen
selecteren. Dan moet Data Entry verzonden worden (Controller nummers 6 en 38) om de
waarde in te stellen.Wanneer RPN berichten eenmaal ontvangen zijn, zullen Data Entry
berichten die daarna op hetzelfde MIDI kanaal ontvangen worden, herkend worden als
veranderend in de richting van de waarde van de RPN berichten. Om geen vergissingen te
maken, is het aan te raden om RPN Null te verzenden, nadat de benodigde parameters zijn
ingesteld.
Dit apparaat ontvangt de volgende RPN's:
RPN Data entry
MSB, LSB MSB, LSB Notes
00H, 00H mmH, llH Pitch Bend Sensitivity
mm: 00H - 18H (0 - 24 semitones)
ll: ignored (processed as 00H)
00H, 01H mmH, llH Master Fine Tuning
mm, ll: 20 00H - 40 00H - 60 00H
(-4096 x 100 / 8192 - 0 - +4096 x 100 / 8192 cent)
00H, 02H mmH, llH Master Coarse Tuning
mm: 10H - 40H - 70H (-48 - 0 - +48 semitones)
ll: ignored (processed as 00H)
00H, 05H mmH, llH Modulation Depth Range
mm, ll:00 00H - 06 00H
(0 - 16384 x 600 / 16384 cent)
7FH, 7FH ---, --- RPN null
RPN en NRPN zullen als 'ongespecificeerd' worden ingesteld. Wanneer deze instelling
eenmaal gemaakt is, zullen daarop volgende, eerder ingestelde parameterwaardes niet
veranderen.
Program Change
Status 2nd byte
CnH ppH
n = MIDI channel number: 0H - FH (ch.1 - 16)
pp = Program number: 00H - 7FH (prog.1 - prog.128)
System Exclusive Messages
Universele Non Realtime System Exclusive berichten en Data Set 1 (DT1), zijn de enige
System Exclusive berichten die door de XV-5050 verzonden worden.
Universal Non-realtime System Exclusive Message
Identity Reply Message
Wanneer een Identity Request bericht ontvangen wordt, stuurt de XV-5050 dit bericht.
Status Data byte Status
F0H 7EH, dev, 06H, 02H, 41H, 10H, 01H, F7H
02H, 02H, 03H, 03H, 00H, 00H
Byte Explanation
F0H Exclusive status
7EH ID number (Universal Non-realtime Message)
dev Device ID (dev: 10H - 1FH)
06H Sub ID#1 (General Information)
02H Sub ID#2 (Identity Reply)
41H ID number (Roland)
10H 01H Device family code
03H 03H Device family number code
03H 00H 00H 00H Software revision level
F7H EOX (End of Exclusive)
Data Transmission
Data set 1 DT1 (12H)
Status Data byte Status
F0H 41H, dev, 00H, 10H, 12H, aaH, bbH, F7H
ccH, ddH, eeH, ... ffH, sum
Byte Explanation
F0H Exclusive status
41H ID number (Roland)
dev Device ID (dev: 00H - 1FH, 7FH)
00H Model ID #1 (XV-5050)
10H Model ID #2 (XV-5050)
12H Command ID (DT1)
aaH Address MSB: hoogste byte van het startadres van de te verzenden
data
bbH Address: hoog midden byte van het startadres van de te
verzenden data
ccH Address: laag midden byte van het startadres van de te
verzenden data
ddH Address LSB: laagste byte van het startadres van de te verzenden
data
eeH Data: de werkelijke data die verzonden wordt. Meerdere
bytes data worden in volgorde, startend vanaf het
adres, verzonden.
: :
ffH Data
sum Checksum
F7H EOX (End Of Exclusive)
* De hoeveelheid data die per keer verzonden kan worden is afhankelijk van het type
data, en data zal vanaf het gespecificeerde startadres en volgens de gespecificeerde
grootte verzonden worden. Raadpleeg het adres en de grootte die in de 'Parameter
Address Map' (p.162) genoemd worden.
* Data groter dan 256 bytes zal in pakketjes van 256 bytes of minder verdeeld worden, en
ieder pakket zal met een interval van ongeveer 20 ms verzonden worden.
161


Need help? Post your question in this forum.

Forumrules
1

Forum

roland-xv5050

Reset search

  • my xv5050 power is of how can i repair the powerboard Submitted on 14-7-2024 at 03:57

    Reply Report abuse
  • my xv5050 power is of how can i erpaie the powerboad Submitted on 14-7-2024 at 03:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV5050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV5050 in the language / languages: Dutch as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland XV5050

Roland XV5050 User Manual - English - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info