647722
136
Zoom out
Zoom in
Previous page
1/169
Next page
136
MIDI Implementation
Model: XV-2020
Date: 2002.6.4
Version: 1.00
1. Receive data
Channel Voice Messages
* Not received in Performance mode when the Receive Switch parameter (Performance
Part) is OFF.
Note off
Status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note off velocity: 00H - 7FH (0 - 127)
* Not received when the Envelope Mode parameter (Patch Tone and Rhythm Tone) is NO-
SUS.
Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note on velocity: 01H - 7FH (1 - 127)
Polyphonic Key Pressure
Status 2nd byte 3rd byte
AnH kkH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = Polyphonic Key Pressure: 00H - 7FH (0 - 127)
* Not received in Performance mode when the Receive Poly Key Pressure parameter
(Performance MIDI) is OFF.
Control Change
* If the corresponding Controller number is selected for the Patch Control Source 1, 2, 3 or
4 parameter (Patch Common), the corresponding effect will occur.
* If a Controller number that corresponds to the System Control Source 1, 2, 3 or 4
parameter (System Common) is selected, the specified effect will apply if Patch Control
Source 1, 2, 3 or 4 parameter (Patch Common) is set to SYS-CTRL1, SYS-CTRL2, SYS-
CTRL3 or SYS-CTRL4.
Bank Select (Controller number 0, 32)
Status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = Bank number: 00 00H - 7F 7FH (bank.1 - bank.16384)
* Not received in Performance mode when the Receive Bank Select (Performance MIDI) is
OFF.
* The Performances, Patches, and Rhythms corresponding to each Bank Select are as
follows.
* The SRX series corresponding to each Bank Select are to see the SRX series owner’s
manual.
+—————+———————————+———————————+——————————————————————+———————————+
| BANK SELECT | PROGRAM | GROUP | NUMBER |
| MSB | LSB | NUMBER | | |
+—————+———————————+———————————+——————————————————————+———————————+
| 085 | 000 | 001 — 064 | User Performance | 001 — 064 |
| | 064 | 001 — 032 | Preset Performance A | 001 — 032 |
| | 065 | 001 — 032 | Preset Performance B | 001 — 032 |
| | : | | : | |
| 086 | 000 | 001 — 004 | User Rhythm | 001 — 004 |
| | 064 | 001 — 002 | Preset Rhythm A | 001 — 004 |
| | 065 | 001 — 002 | Preset Rhythm B | 001 — 004 |
| | : | | : | |
| 087 | 000 | 001 — 128 | User Patch | 001 — 128 |
| | 064 | 001 — 128 | Preset Patch A | 001 — 128 |
| | 065 | 001 — 128 | Preset Patch B | 001 — 128 |
| | : | | : | |
| 092 | 000 — | 001 — | SRX Rhythm | 001 — |
| | : | | : | |
| 093 | 000 — | 001 — | SRX Patch | 001 — |
| | : | | : | |
| 120 | | 001 — 057 | GM Rhythm | 001 — 009 |
| 121 | 000 — | 001 — 128 | GM Patch | 001 — 256 |
+—————+———————————+———————————+——————————————————————+———————————+
Modulation (Controller number 1)
Status 2nd byte 3rd byte
BnH 01H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Modulation depth: 00H - 7FH (0 - 127)
*Not received in Performance mode when the Receive Modulation parameter
(Performance MIDI) is OFF.
Breath type (Controller number 2)
Status 2nd byte 3rd byte
BnH 02H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
Foot type (Controller number 4)
Status 2nd byte 3rd byte
BnH 04H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
Portamento Time (Controller number 5)
Status 2nd byte 3rd byte
BnH 05H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Portamento Time: 00H - 7FH (0 - 127)
* In Performance mode the Part Portament Time parameter (Performance Part) will
change.
Data Entry (Controller number 6, 38)
Status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
Volume (Controller number 7)
Status 2nd byte 3rd byte
BnH 07H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Volume: 00H - 7FH (0 - 127)
*Not received in Performance mode when the Receive Volume parameter (Performance
MIDI) is OFF.
* In Performance mode the Part Level parameter (Performance Part) will change.
Balance (Controller number 8)
Status 2nd byte 3rd byte
BnH 08H vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Balance: 00H - 7FH (0 - 127)
Panpot (Controller number 10)
Status 2nd byte 3rd byte
BnH 0AH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Panpot: 00H - 40H - 7FH (Left - Center - Right),
*Not received in Performance mode when the Receive Pan parameter (Performance
MIDI) is OFF.
* In Performance mode the Part Pan parameter (Performance Part) will change.
Expression (Controller number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Expression: 00H - 7FH (0 - 127)
*Not received when Tone Receive Expression parameter (Patch Tone or Rhythm Tone) is
OFF.
*Not received in Performance mode when Receive Expression parameter (Performance
MIDI) is OFF.
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info