647722
103
Zoom out
Zoom in
Previous page
1/169
Next page
103
Examples of Applications Using the XV-2020
Examples of Applications
Using the XV-2020
6. Click [DETAIL] for SYSTEM COMMON, then set [CLOCK
SOURCE] to [INT].
fig.08-08a.eps_50
fig.08-08b
* When the System Clock Source parameter is set to MIDI or USB, you
can synchronize the LFO cycle to an external device.
7. When [TEMPO] (System Tempo) changes, the speed of the
phrase loop changes along with it.
* The phrase loop sounds at the system’s tempo regardless of which key
you press. The settings for pitch and FXM are ignored.
Using a Pedal Switch to Change the
Rotary Speed of the Rotary Effect
1. Connect a pedal switch (DP-2, DP-6, etc.) to your external
MIDI controller (MIDI keyboard, etc.).
2. Set the pedal switch of the external MIDI controller to
generate FOOT TYPE (CC04) control-change messages.
* To learn how to set up the pedal switch, refer to the external MIDI
controller’s owner’s manual.
3. Click the for [PATCH NAME] and select a Patch that
uses ROTARY as the Multi-Effect.
4. Click [PARAM] for [MFX].
fig.08-03.eps_50
5. Set CONTROL SOURCE 1 to CC04.
6. Set DESTINATION 1 to SPEED, and SENS 1 to +63.
fig.08-19.eps_44
7. When you wish to speed up the rotary effect, press the
pedal switch. Release the pedal switch to slow down the
rotary effect.
Changing Part Settings from
an External MIDI Device
By sending Control Change messages for different Part settings,
including volume, panning, and pitch, you can change these settings
remotely from an external MIDI device connected to the XV-2020.
This lets you control fade-ins and fade-outs, open and close filters,
and exercise other controls in real time from the external MIDI
device.
The parameters that can be used for changing the settings, and the
Control Change messages that can be used to change the values, are
shown below.
* For more detailed information about Control Change messages, please
refer to “MIDI Implementation” p. 136).
* To change multi-effects, reverb, or chorus effects from an external
MIDI device, send a “System Exclusive message” (p. 140).
Remotely Controlling Volume (p. 136)
Volume: Controller number 7
Remotely Controlling Stereo Positioning (p. 136)
Panpot: Controller number 10
Remotely Applying Portamento (p. 136, p. 137)
Portamento: Controller number 65 (Portamento switch),
Controller number 5 (Portamento time)
Remotely Changing Sounds’ Attack and Release
Time (p. 137)
Release Time: Controller number 72
Attack Time: Controller number 73
Remotely Changing the Cutoff Frequency (p. 137)
Cutoff: Controller number 74
Remotely Changing Resonance (p. 137)
Resonance: Controller number 71
Remotely Changing the Amount of Internal Chorus/
Reverb (p. 145)
Effect 3 (Chorus Send Level): Controller number 93
Effect 1 (Reverb Send Level): Controller number 91
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info