647722
89
Zoom out
Zoom in
Previous page
1/169
Next page
89
Using the XV-2020 Effects
Using the XV-2020
Effects
27: OVERDRIVE -> FLANGER
fig.02-027m
28: OVERDRIVE -> DELAY
fig.02-028m
29: DISTORTION -> CHORUS
The parameters are essentially the same as in “26: OD -> CHORUS,”
with the exception of the following two.
OD Drive -> Dist Drive, OD Pan -> Dist Pan
fig.02-029m
30: DISTORTION -> FLANGER
The parameters are essentially the same as in “27: OD ->
FLANGER,” with the exception of the following two.
OD Drive -> Dist Drive, OD Pan -> Dist Pan
fig.02-030m
31: DISTORTION -> DELAY
The parameters are essentially the same as in “28: OD -> DELAY,”
with the exception of the following two.
OD Drive -> Dist Drive, OD Pan -> Dist Pan
fig.02-031m
32: ENHANCER -> CHORUS
fig.02-032m
Parameter Value Description
OD Drive 0-127 Degree of distortion
Also changes the volume.
OD Pan # L64-63R Stereo location of the overdrive
Flg Rate 0.05-10.00 Hz Frequency of modulation
Flg Depth 0-127 Depth of modulation
Flg Feedback -98-+98 % Adjusts the amount of the
flanger sound that’s fed back
into the effect. Negative (-) set-
tings invert the phase.
Flg Delay 0.0-100.0 ms Adjusts the time until the flanger
is heard.
Flg Balance # D100:0W-
D0:100W
Adjusts the volume balance be-
tween the sound sent through
the flanger (W) and the sound
that’s not sent through the
flanger (D).
Level 0-127 Output level
Parameter Value Description
OD Drive 0-127 Degree of distortion
Also changes the volume.
OD Pan # L64-63R Stereo location of the overdrive
Delay Time 0.0-500.0 ms Adjusts the time until the delay is
heard.
Dly Feedback -98-+98 % Adjusts the amount of the delay
sound that’s fed back into the ef-
fect. Negative (-) settings invert the
phase.
Dly HF Damp 200-8000 Hz,
BYPASS
Adjusts the frequency above
which sound fed back to the effect
is filtered out. If you don’t want to
filter out any high frequencies, set
this parameter to BYPASS.
Dly Balance # D100:0W-
D0:100W
Adjusts the volume balance be-
tween the sound sent through the
delay (W) and the sound that’s not
sent through the delay (D).
Level 0-127 Output level
L in
R in
Flanger
Overdrive
L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
L in
R in
Delay
Overdrive
L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
Parameter Value Description
Enhancer Sens # 0-127 Sensitivity of the enhancer
Enhancer Mix 0-127 Level of the overtones generated
by the enhancer
Cho Rate 0.05-10.00 Hz Frequency of modulation
Cho Depth 0-127 Depth of modulation
Cho Delay 0.0-100.0 ms Adjusts the time until the chorus
is heard.
Cho Balance # D100:0W-
D0:100W
Adjusts the volume balance be-
tween the sound sent through
the chorus (W) and the sound
that’s not sent through the cho-
rus (D).
Level 0-127 Output level
L in
R in
Chorus
Distortion
L out
R out
Balance W
Balance W
Balance D
Balance D
L in
R in
Flanger
Distortion
L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
L in
R in
Delay
Distortion
L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
Chorus
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info