647722
86
Zoom out
Zoom in
Previous page
1/169
Next page
86
Using the XV-2020 Effects
17: STEREO DELAY
This is a stereo delay.
When Mode is NORMAL:
fig.02-017am
When Mode is CROSS:
fig.02-017bm
18: MODULATION DELAY
Adds modulation to the delayed sound, producing an effect similar
to a flanger.
When Mode is NORMAL:
fig.02-018am
When Mode is CROSS:
fig.02-018bm
Parameter Value Description
Delay L 0.0-500.0 ms Adjusts the time until the delay
sound is heard.
Delay R
Feedback # -98-+98 % Adjusts the amount of the delay
sound that’s fed back into the effect.
Negative (-) settings invert the
phase.
Mode NORMAL,
CROSS
Selects the way in which delay
sound is fed back into the effect. (See
the figures above.)
HF Damp 200-8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you don’t want to filter
out any high frequencies, set this pa-
rameter to BYPASS.
Phase L NORMAL,
INVERT
Phase of the delay sound
Phase R
Low Gain -15-+15 dB Gain of the low frequency range
High Gain -15-+15 dB Gain of the high frequency range
Balance # D100:0W-
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0-127 Output level
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Parameter Value Description
Delay Left 0.0-500.0 ms Adjusts the time until the delay sound
is heard.
Delay Right
Feedback -98-+98 % Adjusts the amount of the delay sound
that’s fed back into the effect. Negative
(-) settings invert the phase.
Mode NORMAL,
CROSS
Selects the way in which delay sound
is fed back into the effect (See the fig-
ures above.)
HF Damp 200-8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don’t want to filter out any
high frequencies, set this parameter to
BYPASS.
Rate # 0.05-10.00 Hz Frequency of modulation
Depth 0-127 Depth of modulation
Phase 0-180 deg Spatial spread of the sound
Low Gain -15-+15 dB Gain of the low frequency range
High Gain -15-+15 dB Gain of the high frequency range
Balance # D100:0W-
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0-127 Output level
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info