647722
53
Zoom out
Zoom in
Previous page
1/169
Next page
53
Creating a Patch
Creating a Patch
PATCH WG (Patch Wave Group)
This set of parameters allows you to select the PCM waveform that serves as the basis for the currently
selected Tone, apply effects to the waveform, and control its pitch.
Parameter Value Description
WAVE GROUP
(Wave Group)
INT, EXP-A, EXP-B Chooses the desired waveform’s group.
INT: Internal
EXP-A, B: Wave Expansion Boards A, B
* It’s not possible to select EXP-A, B unless a wave expansion board
is inserted into the corresponding slot.
WAVE NUMBER L
(Wave Number Left)
0001–1083 Chooses the desired waveform. You can choose a separate
waveform for the XV-2020’s left and right channels.
* For monaural tones, assign a waveform to the L channel. No
sound will be heard if a waveform is set for only the R channel.
WAVE NUMBER R
(Wave Number Right)
TONE DELAY This produces a time delay between the moment a key is pressed (or released) and the moment the Tone
actually begins to sound. Since you can adjust the timing of each Tone in a Patch, you can create effects in
which pressing a single key produces two or more sounds occurring at different times. If you don’t wish to
use Tone Delay, set Tone Dly to NORMAL and Tone Delay Time to 0.
TONE DELAY MODE NORMAL, HOLD, KEY-OFF-NOR,
KEY-OFF-DCY
Sets the manner in which the Tone sounds.
* If you’ve selected a Wave that is a decay-type sound (i.e., a sound
that fades away naturally even if the key is not released), selecting
KEY-OFF-NOR or KEY-OFF-DCY may result in no sound being
heard.
NORMAL: The Tone sounds after the
specified Delay Time.
HOLD: The Tone will only sound if the key is held for longer
than the specified Delay Time. If the key is released before the
Delay Time has elapsed, the Tone will not sound.
KEY-OFF-NOR: The Tone doesn’t
sound while the key is being pressed, but
sounds after the specified Delay Time
when the key is released.
KEY-OFF-DCY: The Tone doesn’t sound while the key is be-
ing pressed, but sounds after the specified Delay Time when
the key is released. However, for this setting—unlike KEY-
OFF-NOR—the TVA envelope of the Tone begins when the
key is first pressed. As a result, in most cases, only the decay
portion of the sound is heard.
TONE DELAY TIME 0–127, note Specifies the time after which the Tone sounds when using
Tone Delay. When the Structure Type parameter has a setting
of 2–10, the outputs of Tones 1 (3) and 2 (4) are combined with
Tone 2 (4). Tone 1 (or 3) settings are ignored.
GAIN
(Wave Gain)
-6, 0, +6, +12 dB Specifies the gain (or amplitude) of the waveform. An increase
of 6 dB doubles the waveform’s gain. If you intend to use the
Booster to distort the waveform’s sound, set this parameter to
its highest value.
release key
Delay Time
press key
release key
Delay Time
Tone does
not sound
press key
release key press key
Delay
Time
release key
Delay
Time
press key
release key
Delay
Time
press key
Sixty-fourth-note
triplet
Sixty-fourth note
Thirty-second-note
triplet
Thirty-second note
Sixteenth-note
triplet
Dotted thirty-second
note
Sixteenth note
Eighth-note triplet
Dotted sixteenth
note
Eighth note
Quarter-note
triplet
Dotted eighth note
Quarter note Half-note triplet
Dotted half note
Half note
Whole-note triplet
Dotted half note
Whole note
Double-note triplet
Dotted whole
note
Double note
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info