647744

Roland XP-30 Manual

79
Zoom out
Zoom in
Previous page
1/216
Next page
79
Chapter 3. Creating Your Own Sounds
Chapter 3
OFF-OUT:The LFO will be immediately applied when the
key is pressed, and will begin fading out when the
key is released.
fig.3-40.e
Delay (LFO Delay Time)
Adjust the time from when the key is pressed (or released)
until the LFO begins to take effect. (Refer to the diagrams for
Fade Mode.)
Fade (LFO Fade Time)
Adjust the time over which the LFO rises to its full effect (or
diminishes). (Refer to the diagrams for Fade Mode.)
Offset (LFO Offset)
Adjust the basic value of the LFO waveform upward or
downward.
LFO DEPTH 1:2
These parameters adjust the way in which the LFO affects
each parameter. Two values are displayed for each
parameter. The left one is for LFO1, and the right one is for
LFO2.
Pitch (Pitch LFO Depth 1, 2)
Adjust how much the LFO will affect the WG Pitch.
TVF (TVF LFO Depth 1, 2)
Adjust how much the LFO will affect the TVF Cutoff
Frequency.
TVA (TVA LFO Depth 1, 2)
Adjust how much the LFO will affect the TVA Level.
Pan (Pan LFO Depth 1, 2)
Adjust how much the LFO will affect the TVA Pan.
■ Modifying Pitch (PITCH)
The parameters in this group affect the WG Pitch of each
Tone.
PITCH
Specify the basic pitch of each Tone.
Coarse (Coarse Tune)
Adjust the pitch in semitone steps (-4–+4 octaves).
Fine (Fine Tune)
Adjust the pitch in 1-cent steps (-50–+50 cents).
* One cent is 1/100th of a semitone.
Random (Random Pitch Depth)
If you want the pitch of the Tone to change randomly each
time the key is pressed, set the desired amount of pitch
change here. If you do not want the pitch to change
randomly, set this to 0. The value is in units of 1 cent.
Keyfollow (Pitch Key Follow)
This parameter sets the amount of pitch change that will
occur when you move one octave on the keyboard. If you
want the pitch to change 1 octave when the keyboard position
rises 1 octave (as on normal keyboard instruments), set this
parameter to +100. If you want the pitch to rise 2 octaves
when the keyboard position rises 1 octave, set this parameter
to +200. Negative (-) settings will make the pitch become
lower as you play up the keyboard. If you want all keys of the
keyboard to produce the same pitch, set this parameter to 0.
fig.3-41.e
PCH ENVELOPE (Pitch Envelope)
These parameters determine how the Pitch Envelope affects
the pitch.
Envelope Depth (Pitch Envelope Depth)
Adjust the amount of the Pitch Envelope. Higher settings
will result in greater change. Negative (-) settings will invert
the direction of the envelope.
key is
pressed
high (more)
low (less)
WG Pitch /
TVF Cutoff Frequency /
TVA Level / TVA Pan
Delay
Time
Fade
Time
Depth
key is
released
C2 C3 C4 C5 C6 C7
–100
–70
–50
–30
–10
0
+10
+20
+30
+40
+50
+70
+100
+120
+150+200
Pitch
Keyboard position
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XP-30 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info