647744

Roland XP-30 Manual

45
Zoom out
Zoom in
Previous page
1/216
Next page
45
Chapter 1. Overview of the XP-30
Chapter 1
Moving the Cursor (underline)
When two or more items are shown in a single display page,
move the cursor (underline) to the item whose value you
wish to set. Press [ ] to move the cursor to the left, or [ ]
to move it to the right.
fig.1-14
A symbol appearing in the upper right of the display
indicates that there are other items in this page that the
screen has no room to show. Press [ ] to see these items,
and press [ ] to return to the previous display.
fig.1-15
■ Modifying a Value
To modify a value, use the VALUE dial, [INC]/[DEC] or [0]–
[9] (numeric keys).
fig.1-16
* Each parameter has a specific range, so you cannot set any value
smaller than the minimum value or greater than the maximum
value.
VALUE Dial
Rotating the VALUE dial clockwise increases the value,
counterclockwise decreases the value. Holding down
[SHIFT] as you move the VALUE dial increases value
increments so you can make large value changes faster.
[INC] and [DEC]
Pressing [INC] increases the value, and [DEC] decreases it.
Keep [INC] or [DEC] pressed for continuous adjustment. For
faster value increases, keep [INC] pressed down and press
[DEC]. For decreasing value faster, keep [DEC] pressed
down and press [INC].
If you press [INC] or [DEC] while holding down [SHIFT], the
value increments will get bigger.
[0]–[9] (Numeric Keys)
[0]–[9] (Numeric Keys) lets you directly specify a numerical
value. When you enter the number, the value will blink. This
indicates that the value has not yet been finalized. To finalize
the value press the ENTER button. To reverse the sign of the
number (+/-), hold down [SHIFT] and press [0].
* Some parameters do not require you to press [ENTER] to
finalize the value.
< Example 1: To enter a value of 38 >
Press [3] → press [8] → press [ENTER]
< Example 2: To enter a value of -60 >
While holding down [SHIFT] press [0] → press [6] → press
[0] → press [ENTER]
* You can switch from a positive to negative numerical value
anytime before you press [ENTER].
Special Functions of the Numeric Keys
You can use the numeric keys to specify non-numerical
settings for some parameters.
* For the procedure of using the Numeric Keys to enter the
characters or symbols in a name, refer to “Assigning a
Name” (p. 46).
Performance/Patch/Rhythm Set Group
In the PLAY displays of Performance mode/Patch mode/
Rhythm Set mode, you can use the numeric keys to specify
groups. To specify the group, hold down [SHIFT] and press
numeric keys to specify groups.
Buttons
Group
[SHIFT]+[1] PR-A (preset A)
[SHIFT]+[2] PR-B (preset B)
[SHIFT]+[3] PR-C (preset C)
[SHIFT]+[4] PR-D (GM (General MIDI))
[SHIFT]+[5] PR-E (preset E)
[SHIFT]+[6] USER (user)
Restoring a Previous Value (Undo)
If you wish to restore a value to its immediate previous
value, press [UNDO/COMPARE] to return the value to its
pre-modified state.
The Undo function can be used when modifying sound
source settings.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XP-30 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info